Go Back   Techwatch forums > Tech Forums > Satellite TV > Satellite Help > Satellite Cardshare

Satellite Cardshare Card sharing (c/s) discussions. NON-UK providers only. NO Sky discussion!

Reply
 
LinkBack Thread Tools
Old 23-08-10, 07:56 PM   #1 (permalink)
Boldly Going Member
 
Capt Kirk's Avatar
 
Join Date: Aug 2010
Posts: 4
Default CCcam Config Basics Explained

The CCcam.cfg file is where you setup your CCcam server. Usually located in the /var/etc folder. There is really 2 parts of the config, the local settings and the lines. There is alot you can play with, but I'm going to stick to the basics here.

Local Settings

SERVER LISTEN PORT : 12345
Tells CCcam which port to watch for incoming connections, the default is port 12000. Whichever port you use, foward it in your router to the IP of your server

ALLOW WEBINFO: yes
WEBINFO USERNAME : username
WEBINFO PASSWORD : password
Lets you monitor your server stats using CCcamInfoPHP

SERIAL READER : /dev/ttyUSB0
Tells CCcam to use a cardreader, use ttySCI0 for internal readers

Lines

CCcam uses C lines and F lines to connect to your peers. You would put an Fline in your config, and give your peer a corresponding Cline. Here is an example of a Fline and the Cline you would give out

f: username password
f: user1 userpass

c: DNSorIPaddress port username password
c: someserveraanyDNS.com 12000 user1 userpass

there are other options you can add to your lines to control reshare etc for example

f: user1 userpass 3 0 1 {0:0:2}

with this line user1 gets all your shares at a max distance of 3 hops, he has 0 rights to use your emu's, and has auto update rights 1. He can reshare all your cards 1 hop {0:0:2}, with {0:0:1} he has no reshare rights and can only view the cards himself.

As I say there are lots and lots more options in the config file, but these are the basics. CCcam won't parse any line starting with a #, so if your playing about it's a good idea just to # a line rather than delete it.
__________________
No support via PM.

Last edited by Capt Kirk; 24-08-10 at 08:49 AM.
Capt Kirk is offline   Reply With Quote
Old 07-04-11, 06:20 AM   #2 (permalink)
Member
 
Join Date: Apr 2008
Posts: 31
Default Re: CCcam Config Basics Explained

Quote:
Originally Posted by Capt Kirk View Post
The CCcam.cfg file is where you setup your CCcam server. Usually located in the /var/etc folder. There is really 2 parts of the config, the local settings and the lines. There is alot you can play with, but I'm going to stick to the basics here.

Local Settings

SERVER LISTEN PORT : 12345
Tells CCcam which port to watch for incoming connections, the default is port 12000. Whichever port you use, foward it in your router to the IP of your server

ALLOW WEBINFO: yes
WEBINFO USERNAME : username
WEBINFO PASSWORD : password
Lets you monitor your server stats using CCcamInfoPHP

SERIAL READER : /dev/ttyUSB0
Tells CCcam to use a cardreader, use ttySCI0 for internal readers

Lines

CCcam uses C lines and F lines to connect to your peers. You would put an Fline in your config, and give your peer a corresponding Cline. Here is an example of a Fline and the Cline you would give out

f: username password
f: user1 userpass

c: DNSorIPaddress port username password
c: someserveraanyDNS.com 12000 user1 userpass

there are other options you can add to your lines to control reshare etc for example

f: user1 userpass 3 0 1 {0:0:2}

with this line user1 gets all your shares at a max distance of 3 hops, he has 0 rights to use your emu's, and has auto update rights 1. He can reshare all your cards 1 hop {0:0:2}, with {0:0:1} he has no reshare rights and can only view the cards himself.

As I say there are lots and lots more options in the config file, but these are the basics. CCcam won't parse any line starting with a #, so if your playing about it's a good idea just to # a line rather than delete it.
Hi CAPT,
I do have a set back. I have installed CCcam2.2.1 on my DM 800HD clone.
It is visible and it is marked as ACTIV.
On the server to host CCcam, it does not show its presence here. So the channels that I can get via CCcam and config c-line ARE NOT accessible.
How to remedy ? Is it a fault in LOADING or CONFIG.

Thanks for showing me the way out.
Best Wishes.
kadnor is offline   Reply With Quote
Old 06-01-14, 12:37 PM   #3 (permalink)
Junior Member
 
Join Date: Dec 2013
Posts: 9
Question When and Where should I add c-lines to cccam.cfg file?

Should I add the c-lines to the cccam.cfg file after or before searching for channels on various satellites?

What about the existing content of the .cfg file. Shall I delete all the contents and add the c-lines?
net4hack is offline   Reply With Quote
Old 06-01-14, 05:12 PM   #4 (permalink)
Member
 
Join Date: Aug 2010
Posts: 49
Default Re: When and Where should I add c-lines to cccam.cfg file?

Quote:
Originally Posted by net4hack View Post
Should I add the c-lines to the cccam.cfg file after or before searching for channels on various satellites?
It does not matter when you put in the c-line.

Quote:
What about the existing content of the .cfg file. Shall I delete all the contents and add the c-lines?
You can do if you want to .
Sloopy is offline   Reply With Quote
Old 06-01-14, 07:49 PM   #5 (permalink)
Junior Member
 
Join Date: Dec 2013
Posts: 9
Default Re: CCcam Config Basics Explained

Thanks...
net4hack is offline   Reply With Quote
Old 26-09-14, 01:16 AM   #6 (permalink)
Junior Member
 
Join Date: Apr 2009
Posts: 21
Default Re: CCcam Config Basics Explained

Please can someone advise me how to set this up on my Star Tracks 2014 box?

This is my xcamconfig screen





I have been advised to change to cccam2.
Now if I have been given a line for example C: 5sat.dyndns.tv 25168 tests322 sb58896


What do I do with that line?

I have also been given a cccam.cfg file which I could use instead but I don't know how or where to import it to the box.

Thanks
Westindieman is offline   Reply With Quote
Old 26-09-14, 09:14 AM   #7 (permalink)
Super Moderator
 
Join Date: Feb 2006
Posts: 6,034
Default Re: CCcam Config Basics Explained

First ignore the C: this is for the .cfg file.
A line is usually in 4 parts, for example:
First part is the server address: xxxxserver.xxx.tv
Second part is the port: 12000
third part is the username: bysgfygfy
final part is the password: dfgewhu

To enter using a cccam.cfg file, on some receivers, you just transfer this onto a USB stick, plug it into your receiver, navigate to USB and load the file.
On others, like Linux based receivers, you use a FTP program to transfer the file into your raceiver, from your PC.
Mickha is online now   Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Getting Config File from ISP carni Cable Modems 0 17-07-10 09:34 PM


All times are GMT +1. The time now is 07:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0 PL2 ©2011, Crawlability, Inc.