a simple question about the advanced tuning guide - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

roy1234 · 31-08-10, 11:34 PM

i just read The ultimate detailed guide:-

How to install a DiSEqC motor the right way

which i found to be on of the best guide on this on the net.
i seen at the bottom
You may find however that you wish to fine-tune the installation to maximise the signal across the whole arc. The fine tuning process is beyond the scope of this basic setup guide and will be covered in our advanced tuning guide.

can some1 please give me a link to the advanced tuning guide? as iv been unable to find it.

Robbo · 01-09-10, 12:16 AM

I don't think it was ever written.

roy1234 · 02-09-10, 12:39 AM

Quote:

Originally Posted by Robbo

I don't think it was ever written.

haha o rite cheers robbo. im getting ready to put my dish up 2morrw i have already hook my dish up to my motor is it ok to bolt dish onto to motor first then put onto my pole?

Rick · 02-09-10, 10:01 AM

If I'm working up a ladder I will bolt dish and motor together on the ground. It's much easier to allign the dish with the centre spline of the motor shaft. If I'm working on the ground, I put the motor up, then attach the dish.

carraig · 03-09-10, 03:34 PM

Good luck with this Roy, after days and days of struggling I ended up having to bring in a sat guy to fine tune the thing! only took him 20 minutes because I had done the donkey work.

31-08-10, 11:34 PM	#1 (permalink)
roy1234 Junior Member Join Date: Jan 2010 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	a simple question about the advanced tuning guide i just read The ultimate detailed guide:- How to install a DiSEqC motor the right way which i found to be on of the best guide on this on the net. i seen at the bottom You may find however that you wish to fine-tune the installation to maximise the signal across the whole arc. The fine tuning process is beyond the scope of this basic setup guide and will be covered in our advanced tuning guide. can some1 please give me a link to the advanced tuning guide? as iv been unable to find it.

01-09-10, 12:16 AM	#2 (permalink)
Robbo Satellite mad Join Date: Jul 2007 Location: Kent Posts: 9,231 Thanks: 93 Thanked 1,967 Times in 1,590 Posts	Re: a simple question about the advanced tuning guide I don't think it was ever written. __________________ القمر الصناعي هو أفضل TM600 linux,TM6800HD,TM5200,TM1000,TM2200 motor, Triax TD110 dish. Electronics Engineer and satellite installer.MBC Satellites

02-09-10, 10:01 AM	#4 (permalink)
Rick Super Moderator Join Date: Jun 2008 Location: Blackburn, UK Posts: 2,597 Thanks: 300 Thanked 1,029 Times in 669 Posts	Re: a simple question about the advanced tuning guide If I'm working up a ladder I will bolt dish and motor together on the ground. It's much easier to allign the dish with the centre spline of the motor shaft. If I'm working on the ground, I put the motor up, then attach the dish. __________________ Fibo 1.2m HH, Wavefield T90. AzBox HD Premium, Vu+ Duo Plumber and Satellite Installer North West Satellite Systems

03-09-10, 03:34 PM	#5 (permalink)
carraig Senior Member Join Date: Dec 2007 Location: Belfast Posts: 121 Thanks: 28 Thanked 5 Times in 4 Posts	Re: a simple question about the advanced tuning guide Good luck with this Roy, after days and days of struggling I ended up having to bring in a sat guy to fine tune the thing! only took him 20 minutes because I had done the donkey work.