How do I install CCcam on Jade 3 Enigma 2?

[whowhowho]

Hello,
My dreambox crashed and was not rebooting.

So I used dreamup to flash the following image:
pli-enigma2-jade3-dm7025-20091005-6705.nfi
But how do I install CCcam 2.13 or 2.14 on the dreambox?

Many thanks in advance,

*SORRY IF POST IS DUPLICATED*

[unadkat]

Originally Posted by whowhowho

Hello,
My dreambox crashed and was not rebooting.

So I used dreamup to flash the following image:
pli-enigma2-jade3-dm7025-20091005-6705.nfi
But how do I install CCcam 2.13 or 2.14 on the dreambox?

Many thanks in advance,

*SORRY IF POST IS DUPLICATED*

download cccam.tar.gz .. and then ftp it manually to var/tmp and make sure you chmod 755.

After that access the box and manually install it via plugins menu.

I have never used that image so i dont know how to do it.. but doing it manually should work mate.

have you also tryed by pressing the Blue button and see if there is any options there.

On the Enigma and EDG nemesis you can do it via blue button.

[whowhowho]

I have tried almost everything.

When I press the Blue button i get the following menu
- Sleep timer
- graphical multi epg
- PPanels
- Activate picture in picture menu

I cannot find anywhere to install manually

In the Plugins menu
- I can download the softcam from -> Downloadable new plugins
->CCcam 2.1.3 softcam


But I can't find anywhere to install it manully , I just cannot find that function??? I do enot think it is present on this imag

any ideas?

[parricull]

what dreambox you using as some clones will only take enigma 1 images so im led to believe? i personally use Open Pli public beta image but not sure where you can download it,this is simple and easy to use and download ccam via the remote.It really is straight forward.FYI i use a dm500s clone

[whowhowho]

I have an original dreambox 7035.

I already had the Jade 3 Enigma 2 installed on the dreambox and my cousin configured it for me, but lost the CCcam configuration when I flashed the box after it crashed. However I do not want to go back to him and ask him again and again. I wish to learn for myself. I have spent at least 3-4 days searching on various forum but I am none the wiser.

Would the beta image you are using be similar to this one?
OpenPLi-unstable-dm7025-20100923.nfi
http://www.pli-images.org/modules/file_downloads/file_downloads.php?fd_id=1&dir=/dm7025

Thank you.

[kerrywez]

Originally Posted by unadkat

download cccam.tar.gz .. and then ftp it manually to var/tmp and make sure you chmod 755.

After that access the box and manually install it via plugins menu.

I have never used that image so i dont know how to do it.. but doing it manually should work mate.

have you also tryed by pressing the Blue button and see if there is any options there.

On the Enigma and EDG nemesis you can do it via blue button.

From my reelection the Pli images need their own EMUs, you can download them from their site as far as I can remember.

Regards Wez

[whowhowho]

Thanks for advice.

I have searched the site and cannot find where to doanload the EMU's from.

any pointers?

[whowhowho]

Found the plugins menu - i was being hasty.

for anyone else intrestes
PLi® Images website - PLi® Wiki: E2Plugins