talkback pace di4001n

[richard007]

can some1 please send me a pic of cutting the talkback in the pace 4001 please
i am very thanksfull cheers rich.

[ouzi1212]

u will need to cut the track inside the tuner, check in downloads, there is guide called cable for dummies there is a pic where to cut the tb track.

[msn4n]

thanks

[staffy972]

hi im looking for information/pictures on cutting the talkback on the pace di4001nc ntl box the chip inside it has AD8321AR on it, 10 legs on each side and a dimple above the 1st leg on bottom left handside is this the correct chip if so which leg do i cut thanks

[adjbeatbox]

Originally Posted by staffy972

hi im looking for information/pictures on cutting the talkback on the pace di4001nc ntl box the chip inside it has AD8321AR on it, 10 legs on each side and a dimple above the 1st leg on bottom left handside is this the correct chip if so which leg do i cut thanks

Look @ the CIM if you have it in your hand, with the cable feed on your right hand side.
It will be pin 10 of the IC. (@ the bottom, where the green track goes thru the case). Just cut the track here, with a blade instead of lifting the leg of the IC...
Much easier m8.
Regards, Beatbox