kryptview a780 takin to another house

[stando]

will it work if i take my kryptview a780 to another house and connect it up and it will work or will i have to factory reset again?


would a bt hub work as a route?

[G77]

if the other house is on a diff netid i expect you would need to set this and do another scan.

[ratcatcher]

u certainly wud as this is what i had to do when i lent my box to my dad

[clio1]

yes make sure you do a fully factory default on the box, make sure you have the Net Id for that area and do the scan on that on direct feed not splitter, when you return to your house you will have to do the same again, and dont worry it wont effect the firmware on the box.

[stando]

oriteee cheeres lads n yeh its the same net id its jst dwn the road.

[abu baniaz]

The advice for doing a full factory reset is very useful.

Prior to doing the reset, I had just done a scan. This resulted in missing channels. I had attributed these to poor signal!

Having done the reset,the missing channels have started working.

[johnnybravo]

if its in the same area and on the same cable network you don't have to do or change anything