help setting my wifi bridge up

[damo2010]

can any one tell me haw to set up a wifi bridge for my starview 7 plse

[cbk]

Just use the software CD that came with the WIFI and follow the instructions.

All your putting in is your ROUTER WEP key then plug into back starview 7

[damo2010]

do i put it into my router or computer

ive tryed putting it into my pc tower but it doesnt find the bridge so when i put it in the router it finds it

haw do i test to see if it works should i beable to connect to the internet on my laptop when its done

ive tryed it on my blade 7000 box and it doesnt work ..???????

[lambo]

what kind of wifi bridge do you have ? you should be able to connect it to you pc and set it up from there.

[damo2010]

vonets its blue with 2 black wires coming out usb and ethernet

[lincsat]

You connect to your PC with Ethernet and power it up, you can use the USB for power. Then run the setup app from the mini-CD

[damo2010]

thanks to all that helped me ive sorted it

[itsallg00d]

im having this prob too, ive configured the wifi bridge and works on my laptop and gives me internet connection but does not seem to work on the sv7
do i need to configure it with the sv7 in some way?

[lincsat]

You would need to reboot the Starview after the Vonets is setup so it gets the IP address from that. You can check in the Network settings on the box that it has received a valid IP address.

It may also be that the voltage from the Starview is a little low for the Vonets, you could try it with a 10-12v PSU, something like what is used with a VM modem.