New Haxorware Settings

[fnr3master]

@ bruce ica, i think wot parricull means is judging by ur O.P and the partial event log u posted it would suggest that ur problem is not mac's but ur frequency if u have tried a shed load of macs to no avail then i would go back over ur very basic settings etc, do a default set or factory settings (or wotever it says and then go over ur settings again).

and if its still no good then you say u have 4 others working ok, so the simplest thing to do is to upload the non vol off one of ur working modems and test with a good mac and all shud be good, if still no joy and ur sure ur line is good and settings are ok then i would just reflash it. simple as that mucker.

btw wot modem is it

[bruce_ica]

Originally Posted by fnr3master

@ bruce ica, i think wot parricull means is judging by ur O.P and the partial event log u posted it would suggest that ur problem is not mac's but ur frequency if u have tried a shed load of macs to no avail then i would go back over ur very basic settings etc, do a default set or factory settings (or wotever it says and then go over ur settings again).

and if its still no good then you say u have 4 others working ok, so the simplest thing to do is to upload the non vol off one of ur working modems and test with a good mac and all shud be good, if still no joy and ur sure ur line is good and settings are ok then i would just reflash it. simple as that mucker.

btw wot modem is it

i get were your coming from. i only have the 4 to do which is my the mate the bro and my mas dont get me wrong a few months ago i could not keep one on more than a few days max but i found it was my macs and not the setting i find the older macs is the best for me anyways

[jack08]

Originally Posted by parricull

Quit saying its the mac, he needs it synced to the network first,if he aint got the frequency settings correct along with his settings, and the right bpi he wont get net access at all,he can try a 100% working mac but if he aint connected to the network he wont get web access, read his opening log.....or test it yourself ,change the downstream settings and you will booted off also...

i used default settings all i did in haxo was put freq in and changed bpi to 1.0
all needs doing there no speaical settngs that will get you on line
if the guy doesnt know how to put freq or set bpi then he should give up
its all in haxo settings
and if hes getting virgin reg page wen get bad mac his freq is fine

[leeco]

freq all in and the page gives me operational, so i guess all is well but just need a working Mac for Trowell, Nottm, but thanks again for all your help.

Ilkeston worked in the past.

Lee

[blue nose]

im getting operational but not getting internet access.....

[leeco]

Sounds like u need a new mac mate

[bruce_ica]

Originally Posted by blue nose

im getting operational but not getting internet access.....

if your Configuration file on the main page says 416 that means it will work if it says 1172 means the mac is dead full stop

[shadowz]

hello sorry to jack the post but how do i know what frequency to set my modem to cheers shadowz

[tommy2426]

anyone point me to the hax settings for the 256, done a few webbys b4, but lost the pdf and dont know if there the same, its flashed with rev 39, but i think the guy who gave me them has been farting about with the settings himself, thanks in advance, cheers