tune - Page 2 - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

the kize · 12-05-07, 01:08 AM

have you tried removing the jumper inside the box next to the big battery?

KWACKER · 12-05-07, 01:19 AM

with power on or off and for how long mate cheers

the kize · 12-05-07, 01:22 AM

power off for about 60 sec

KWACKER · 12-05-07, 01:41 AM

right tried that,still the same when you try to boot up and no access to engineers menu just says diag on display nothing on the tv .i think i need a miracle or something

the kize · 12-05-07, 02:11 PM

never seen diag before mate? my box only ever had tune on the display and the sorry to interrupt your viewing on the screen, try removing the jumper again and give it 5 mins this time, then the reboot after that. its worth a try..

KWACKER · 12-05-07, 02:58 PM

sorry mate my mistake it says dia9 on the display when i try to enter the engineers menu otherwise it just says tune.ive took the box apart and it appears to be a refurbished unit one of the tuners seems newer than the other ie the one closest to the front is this the downfeed tuner it had a lot of old flux around it cleaned this off no effect.could this s**t corrode the connections? cheers

will try jumper again not holding out much hope think i may try resoldering the tuners connections.cheers

the kize · 12-05-07, 03:09 PM

you've got me there mate? i would just leave it on for a couple of days.

KWACKER · 12-05-07, 03:25 PM

I've just put the jumper back in i'm going to do as you suggest and leave it on for a while see what happens.cheers for all your help mate.if anybody has any suggestions fire them in. many thanks

please help me please · 15-05-07, 03:06 PM

hi can some one please help me i got pace box ditv-1000 i force start 4321
and it keeps on runing with codes and never stops i have to unplug to stop
and the second is when i get the red jumper out and keep it out for few minute and put it back to go to eng menu it doesnt go it just says please wait loading software can some one please help needed here thanks

5av1dg312 · 15-05-07, 04:32 PM

Responded in you new thread.

12-05-07, 01:08 AM	#11 (permalink)
the kize Member Join Date: Mar 2007 Location: glasgow Posts: 90 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune have you tried removing the jumper inside the box next to the big battery?

12-05-07, 01:19 AM	#12 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune with power on or off and for how long mate cheers __________________ stay cool,hang loose,admit nothing

12-05-07, 01:22 AM	#13 (permalink)
the kize Member Join Date: Mar 2007 Location: glasgow Posts: 90 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune power off for about 60 sec

12-05-07, 01:41 AM	#14 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune right tried that,still the same when you try to boot up and no access to engineers menu just says diag on display nothing on the tv .i think i need a miracle or something __________________ stay cool,hang loose,admit nothing

12-05-07, 02:11 PM	#15 (permalink)
the kize Member Join Date: Mar 2007 Location: glasgow Posts: 90 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune never seen diag before mate? my box only ever had tune on the display and the sorry to interrupt your viewing on the screen, try removing the jumper again and give it 5 mins this time, then the reboot after that. its worth a try..


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

12-05-07, 02:58 PM	#16 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune sorry mate my mistake it says dia9 on the display when i try to enter the engineers menu otherwise it just says tune.ive took the box apart and it appears to be a refurbished unit one of the tuners seems newer than the other ie the one closest to the front is this the downfeed tuner it had a lot of old flux around it cleaned this off no effect.could this s*t corrode the connections? cheers will try jumper again not holding out much hope think i may try resoldering the tuners connections.cheers __________________ stay cool,hang loose,admit nothing* Last edited by KWACKER; 12-05-07 at 03:02 PM.

12-05-07, 03:09 PM	#17 (permalink)
the kize Member Join Date: Mar 2007 Location: glasgow Posts: 90 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune you've got me there mate? i would just leave it on for a couple of days.

12-05-07, 03:25 PM	#18 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune I've just put the jumper back in i'm going to do as you suggest and leave it on for a while see what happens.cheers for all your help mate.if anybody has any suggestions fire them in. many thanks __________________ stay cool,hang loose,admit nothing

15-05-07, 03:06 PM	#19 (permalink)
please help me please Junior Member Join Date: Apr 2007 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune hi can some one please help me i got pace box ditv-1000 i force start 4321 and it keeps on runing with codes and never stops i have to unplug to stop and the second is when i get the red jumper out and keep it out for few minute and put it back to go to eng menu it doesnt go it just says please wait loading software can some one please help needed here thanks

15-05-07, 04:32 PM	#20 (permalink)
5av1dg312 Clueless Cable Moderator Join Date: Apr 2007 Location: Nottingham Posts: 1,389 Thanks: 10 Thanked 24 Times in 17 Posts	Re: tune Responded in you new thread. __________________ *5av1dg312* *Clueless Cable Moderator* Click HERE to Donate to Techwatch

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
best satellites to tune to	harty	Digital Satellite Chat	1	26-03-07 03:50 PM