tune - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

the kize · 12-04-07, 03:29 PM

the pace 4001 box i have always shows tune on the display and the "sorry to interrupt your viewing" screen" i've done a couple of boxes recently with no probs? do you think the box is goosed?

lincsat · 13-04-07, 01:15 PM

You could try pulling the jumper and starting again - does it go into the engineers menu?

the kize · 13-04-07, 08:35 PM

result!

just got in from work and the box is now up and running.

KWACKER · 11-05-07, 06:34 PM

kize did you pull the red jumper as lincsat suggested or did you just leave it on untill it sorted itself i seem to have the same problem with the box i have (pace 4001) cheers

the kize · 11-05-07, 07:17 PM

hi kwacker, no i just left that box on and went to work and it was on filmflex when i returned.
but i have another 4001 box that just stays on tune even after removing the jumper. i've tried another tuner in it also?

KWACKER · 11-05-07, 07:24 PM

thanks for the prompt reply kize,i guess i will leave it on for a bit see if comes on.cheers

ps box has been on for about a half hour,any idea how long yours was on before you went to work,just to give me rough idea how long to leave it on for cheers mate

the kize · 11-05-07, 09:28 PM

very strange? just had another go with that pace box i'd gave up on a few weeks ago(i had it on for 4/5 days)... and on it came after only half an hour.

thanks kwacker

ps kwacker. try holding the channel down button on the box turn on the power until it reboots,then power off and back on again thats wot i just did mate. good luck:-)

KWACKER · 11-05-07, 10:05 PM

right tried the reboot as suggested held the button down the word boot comes up for a second then nothing except the standby light,the remote does nothing.turn off then on back to tune and sorry to....blah blah blah...ps how long does it usually say boot? cheers mate.

the kize · 11-05-07, 10:51 PM

this is the sequence i did-power off the box, press the down button on the box, power on the box you will get boot on the box display, keep holding until you get the ntl screen and then it says starting in the bottom right of the screen, you will then get a message saying something like- your channels are unavailable, press sellect on your remote you should have 0 on the box display, turn the box off and on again then just leave it on and wait?

KWACKER · 12-05-07, 12:03 AM

yeah im getting nothing like that mines just says boot for a sec then jumps to standby (well the standby comes on)and stops.... doh

12-04-07, 03:29 PM	#1 (permalink)
the kize Senior Member Join Date: Mar 2007 Location: glasgow Posts: 119 Thanks: 0 Thanked 0 Times in 0 Posts	tune the pace 4001 box i have always shows tune on the display and the "sorry to interrupt your viewing" screen" i've done a couple of boxes recently with no probs? do you think the box is goosed?

13-04-07, 01:15 PM	#2 (permalink)
lincsat Super-Dooper Moderator Join Date: Sep 2005 Location: In front of the PC Posts: 6,002 Thanks: 8 Thanked 2,580 Times in 667 Posts	Re: tune You could try pulling the jumper and starting again - does it go into the engineers menu?

13-04-07, 08:35 PM	#3 (permalink)
the kize Senior Member Join Date: Mar 2007 Location: glasgow Posts: 119 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune result! just got in from work and the box is now up and running.

11-05-07, 06:34 PM	#4 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Re: tune kize did you pull the red jumper as lincsat suggested or did you just leave it on untill it sorted itself i seem to have the same problem with the box i have (pace 4001) cheers __________________ stay cool,hang loose,admit nothing

11-05-07, 07:17 PM	#5 (permalink)
the kize Senior Member Join Date: Mar 2007 Location: glasgow Posts: 119 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune hi kwacker, no i just left that box on and went to work and it was on filmflex when i returned. but i have another 4001 box that just stays on tune even after removing the jumper. i've tried another tuner in it also?

11-05-07, 07:24 PM	#6 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Re: tune thanks for the prompt reply kize,i guess i will leave it on for a bit see if comes on.cheers ps box has been on for about a half hour,any idea how long yours was on before you went to work,just to give me rough idea how long to leave it on for cheers mate __________________ stay cool,hang loose,admit nothing Last edited by KWACKER; 11-05-07 at 07:35 PM. Reason: more info

11-05-07, 09:28 PM	#7 (permalink)
the kize Senior Member Join Date: Mar 2007 Location: glasgow Posts: 119 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune very strange? just had another go with that pace box i'd gave up on a few weeks ago(i had it on for 4/5 days)... and on it came after only half an hour. thanks kwackerps kwacker. try holding the channel down button on the box turn on the power until it reboots,then power off and back on again thats wot i just did mate. good luck:-) Last edited by the kize; 11-05-07 at 09:48 PM.

11-05-07, 10:05 PM	#8 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Re: tune right tried the reboot as suggested held the button down the word boot comes up for a second then nothing except the standby light,the remote does nothing.turn off then on back to tune and sorry to....blah blah blah...ps how long does it usually say boot? cheers mate. __________________ stay cool,hang loose,admit nothing

11-05-07, 10:51 PM	#9 (permalink)
the kize Senior Member Join Date: Mar 2007 Location: glasgow Posts: 119 Thanks: 0 Thanked 0 Times in 0 Posts	Re: tune this is the sequence i did-power off the box, press the down button on the box, power on the box you will get boot on the box display, keep holding until you get the ntl screen and then it says starting in the bottom right of the screen, you will then get a message saying something like- your channels are unavailable, press sellect on your remote you should have 0 on the box display, turn the box off and on again then just leave it on and wait?

12-05-07, 12:03 AM	#10 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Re: tune yeah im getting nothing like that mines just says boot for a sec then jumps to standby (well the standby comes on)and stops.... doh __________________ stay cool,hang loose,admit nothing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
best satellites to tune to	harty	Satellite Help	1	26-03-07 02:50 PM