Having Haxorware Troubles - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Slimbo · 15-03-11, 01:35 AM

I am getting disconnected/reconnected every 15 minutes or so with the following Event Log messages...

weebz · 15-03-11, 08:17 PM

try more macs

bruce_ica · 15-03-11, 09:49 PM

Quote:

Originally Posted by Slimbo

I am getting disconnected/reconnected every 15 minutes or so with the following Event Log messages...

are you using a router? if so Clone MAC Address if not use smac i have had a few probs with my router Clone the mac and its fine now

Gypo · 16-03-11, 10:41 PM

Do your stealth setting match your mac?

Webstar firmware has no cvc or signature.

Since switching to Webstar firmware and MAC, I've had no flag's in the log at all.

Slimbo · 16-03-11, 11:03 PM

Quote:

Originally Posted by bruce_ica

are you using a router? if so Clone MAC Address if not use smac i have had a few probs with my router Clone the mac and its fine now

I have a router connected to my modem yes, am I suppose to clone the mac that im using for the modem?

Slimbo · 16-03-11, 11:07 PM

Quote:

Originally Posted by Gypo

Do your stealth setting match your mac?

Webstar firmware has no cvc or signature.

Since switching to Webstar firmware and MAC, I've had no flag's in the log at all.

How would i match the stealth settings with the mac? do I have to download the config file and upload it as haxorware config?

Gypo · 16-03-11, 11:37 PM

You need to download the config file for the MAC you are using and open it in Vultureware, in that config file you will find the firmware name you should be using for that MAC. Stick that firmware name and the rest of the relevant info (can be found by searching this forum) into the stealth page on haxorware and you should be good.

I stopped using haxorware as the event log was always filled with errors even after using the correct stealth settings, all the usable MAC's in my area are for signed firmware with an included CVC except the Webstars. I downloaded the Webstar firmware from the VM TFTP server and now use that with Webstar MAC's and all is good, I'm playing about with the other signed firmwares trying to remove the CVC but so far I've had no luck.

fnr3master · 17-03-11, 10:40 PM

Quote:

Originally Posted by Gypo

I stopped using haxorware as the event log was always filled with errors even after using the correct stealth settings, all the usable MAC's in my area are for signed firmware with an included CVC except the Webstars. I downloaded the Webstar firmware from the VM TFTP server and now use that with Webstar MAC's and all is good, I'm playing about with the other signed firmwares trying to remove the CVC but so far I've had no luck.

mmmhhhh sounds good, keeps us posted

Gypo · 17-03-11, 11:14 PM

It wont be any time soon mate, I have very little time to dedicate to this and I don't really know what I'm doing

Just reading DOCSIS spec sheets and trying to make sense out of it all.

15-03-11, 01:35 AM	#1 (permalink)
Slimbo Junior Member Join Date: Aug 2009 Location: Wolverhampton, UK Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Having Haxorware Troubles I am getting disconnected/reconnected every 15 minutes or so with the following Event Log messages...

15-03-11, 08:17 PM	#2 (permalink)
weebz Senior Member Join Date: May 2008 Posts: 817 Thanks: 30 Thanked 131 Times in 100 Posts	Re: Having Haxorware Troubles try more macs

16-03-11, 10:41 PM	#4 (permalink)
Gypo Member Join Date: Dec 2009 Posts: 77 Thanks: 5 Thanked 13 Times in 12 Posts	Re: Having Haxorware Troubles Do your stealth setting match your mac? Webstar firmware has no cvc or signature. Since switching to Webstar firmware and MAC, I've had no flag's in the log at all.

16-03-11, 11:37 PM	#7 (permalink)
Gypo Member Join Date: Dec 2009 Posts: 77 Thanks: 5 Thanked 13 Times in 12 Posts	Re: Having Haxorware Troubles You need to download the config file for the MAC you are using and open it in Vultureware, in that config file you will find the firmware name you should be using for that MAC. Stick that firmware name and the rest of the relevant info (can be found by searching this forum) into the stealth page on haxorware and you should be good. I stopped using haxorware as the event log was always filled with errors even after using the correct stealth settings, all the usable MAC's in my area are for signed firmware with an included CVC except the Webstars. I downloaded the Webstar firmware from the VM TFTP server and now use that with Webstar MAC's and all is good, I'm playing about with the other signed firmwares trying to remove the CVC but so far I've had no luck.

17-03-11, 11:14 PM	#9 (permalink)
Gypo Member Join Date: Dec 2009 Posts: 77 Thanks: 5 Thanked 13 Times in 12 Posts	Re: Having Haxorware Troubles It wont be any time soon mate, I have very little time to dedicate to this and I don't really know what I'm doing Just reading DOCSIS spec sheets and trying to make sense out of it all.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Haxorware Settings	leeco	Cable Modems	28	11-03-11 11:02 PM
Haxorware 1.1.32 SETTING HELP PLEASE	lee dennison	Cable Modems	10	13-01-11 12:14 PM
Haxorware tutorial step by step	ovvo	Cable Modems	0	27-08-10 03:35 PM
Flashing Haxorware	aamir007	Cable Modems	15	24-08-10 04:32 PM
haxorware help.	lee dennison	Cable Modems	7	19-06-10 01:33 AM