Problem programming Funcard to Samsung 2100c - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

paul001 · 23-04-07, 03:06 PM

Hi Anyone

I am having a problem programming mu AU funcard 4 to my Samsung 2100c box
I am just getting a blank screen on the channels I should not be getting. Does not say unsubribed channel.

I am using the following

Programmer: Phoenix infinety Card: Funcard 4
Software: Rh v1 Swap bin hex.
Jtag lead and Samsung debug tool to read BK and IRD from box.
NSC coverts nagra serial code to IRD. Matches the one from JTAG.
Pure NTL area.

I have removed battery and re soldered. changed password. and net ID. Removed TB.
Checked engineers menu Frequency and ID correct.

I have follwed all the instructions as in the tutorial. I have Place the IRD backwards and forward but no luck. However I do get the BK as being all '0'. is this a true reading. How can I check to see if my readings are correct from JTAG.

Normal free channels everything elsa blank.

Appreciate any help.

Comatoes · 08-05-07, 06:38 PM

What program r u using to get the boxkey. What byte location r u using to extract bkey m8?

ish1965 · 09-07-08, 01:32 AM

which flash do i use for Sammy-2100c Funcard4, One I have downloaded for 2110 or One I used for Pace 4001.

Thanks in Advance

rizlaman · 09-07-08, 02:32 AM

Quote:

Originally Posted by paul001

Hi Anyone

I am having a problem programming mu AU funcard 4 to my Samsung 2100c box
I am just getting a blank screen on the channels I should not be getting. Does not say unsubribed channel.

I am using the following

Programmer: Phoenix infinety Card: Funcard 4
Software: Rh v1 Swap bin hex.
Jtag lead and Samsung debug tool to read BK and IRD from box.
NSC coverts nagra serial code to IRD. Matches the one from JTAG.
Pure NTL area.

I have removed battery and re soldered. changed password. and net ID. Removed TB.
Checked engineers menu Frequency and ID correct.

I have follwed all the instructions as in the tutorial. I have Place the IRD backwards and forward but no luck. However I do get the BK as being all '0'. is this a true reading. How can I check to see if my readings are correct from JTAG.

Normal free channels everything elsa blank.

Appreciate any help.

Blank screen means wrong bk mate jatag live on stream with correct bytes and you should get your correct bk no problems.rizlaman

rizlaman · 09-07-08, 02:35 AM

Quote:

Originally Posted by ish1965

which flash do i use for Sammy-2100c Funcard4, One I have downloaded for 2110 or One I used for Pace 4001.

Thanks in Advance

Use the one you used for 4001 make sure you get the right 1 for your area,its all on the chatterboxcc toolbar im in pure so i use pure fun fix look on tool bar you will find wat you are looking for.rizlaman.

reddiesel · 09-07-08, 03:18 AM

All files and fixes are also in our download site.

ish1965 · 09-07-08, 08:12 AM

I tried looking for download site, but unable to locate, help!!

willin · 09-07-08, 08:53 AM

Quote:

Originally Posted by ish1965

I tried looking for download site, but unable to locate, help!!

cable section/private FTA/1st thread!!

sassbs11 · 09-07-08, 10:05 AM

cable section but you have to be logged in

hush · 21-11-08, 11:46 PM

by the way a bit of wire on the + and - will short the batt

23-04-07, 03:06 PM	#1 (permalink)
paul001 Senior Member Join Date: Apr 2007 Posts: 185 Thanks: 10 Thanked 1 Time in 1 Post	Problem programming Funcard to Samsung 2100c Hi Anyone I am having a problem programming mu AU funcard 4 to my Samsung 2100c box I am just getting a blank screen on the channels I should not be getting. Does not say unsubribed channel. I am using the following Programmer: Phoenix infinety Card: Funcard 4 Software: Rh v1 Swap bin hex. Jtag lead and Samsung debug tool to read BK and IRD from box. NSC coverts nagra serial code to IRD. Matches the one from JTAG. Pure NTL area. I have removed battery and re soldered. changed password. and net ID. Removed TB. Checked engineers menu Frequency and ID correct. I have follwed all the instructions as in the tutorial. I have Place the IRD backwards and forward but no luck. However I do get the BK as being all '0'. is this a true reading. How can I check to see if my readings are correct from JTAG. Normal free channels everything elsa blank. Appreciate any help.

08-05-07, 06:38 PM	#2 (permalink)
Comatoes All Modded Cons Join Date: May 2007 Location: Belfast Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Problem programming Funcard to Samsung 2100c What program r u using to get the boxkey. What byte location r u using to extract bkey m8?

09-07-08, 01:32 AM	#3 (permalink)
ish1965 Junior Member Join Date: May 2008 Posts: 23 Thanks: 14 Thanked 0 Times in 0 Posts	Re: Problem programming Funcard to Samsung 2100c which flash do i use for Sammy-2100c Funcard4, One I have downloaded for 2110 or One I used for Pace 4001. Thanks in Advance

09-07-08, 03:18 AM	#6 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,615 Thanks: 175 Thanked 949 Times in 832 Posts	Re: Problem programming Funcard to Samsung 2100c All files and fixes are also in our download site.

09-07-08, 08:12 AM	#7 (permalink)
ish1965 Junior Member Join Date: May 2008 Posts: 23 Thanks: 14 Thanked 0 Times in 0 Posts	Re: Problem programming Funcard to Samsung 2100c I tried looking for download site, but unable to locate, help!!

09-07-08, 10:05 AM	#9 (permalink)
sassbs11 Senior Member Join Date: Jun 2008 Posts: 358 Thanks: 99 Thanked 5 Times in 5 Posts	Re: Problem programming Funcard to Samsung 2100c cable section but you have to be logged in

21-11-08, 11:46 PM	#10 (permalink)
hush Junior Member Join Date: Nov 2008 Posts: 3 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Problem programming Funcard to Samsung 2100c by the way a bit of wire on the + and - will short the batt