| Eurovox Eurovox forum for Eurovox help and support: Eurovox, Eurovox max, etc |
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) |
|
Junior Member
Join Date: Apr 2007
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi,
Just wondering if anyone can help. I have two blue Max boxes and the problems are: First one is just staying on the red Led for standby, i cant reflash it as I cant get the power to it, and the other is just coming up with two green dashes on the channel number and then nothing. Thanks John |
|
|
|
|
|
#4 (permalink) |
|
Senior Member
Join Date: Jan 2007
Posts: 198
Thanks: 0
Thanked 8 Times in 7 Posts
|
try reflashing with dnupman ( not voxer ) when you get message can't connect you should be able to select com port 1 ,once done try pulling out power lead and back in sometimes it can take ten attempts to get it done ,if it still won't take the flash then return to your supplier if still under warranty
alex |
|
|
|
|
|
#5 (permalink) |
|
Member
Join Date: Apr 2007
Posts: 42
Thanks: 11
Thanked 6 Times in 5 Posts
|
hi,
peeps going on a about reset button,...there is one on the motherboard,i think only on the eurovox 2,dont think on the 3,..i only no of one person who got it reset by this thou,...if all fails it,s worth a look |
|
|
|
|
|
#6 (permalink) |
|
Senior Member
Join Date: Jan 2007
Posts: 198
Thanks: 0
Thanked 8 Times in 7 Posts
|
its on all versions of eurovox ,on the front of main board , small square button , normally only does any good if your box has frozen up , and freezing seems to be caused by owners not clearing channel data before the scan or load cdf
alex |
|
|
|
|
|
#7 (permalink) |
|
Member
Join Date: Apr 2007
Posts: 47
Thanks: 11
Thanked 0 Times in 0 Posts
|
Yo Yo Yo
Use DnUpMan to reflash the unit. Keep the button pressed that is inside the unit on the main board, then switch the power on at the mains still keeping button pressed throughout this process then run DnUpMan then send firmware you will probably get a error messages initially but it will prompt you to flash the unit in boot mode and all you do is select YES and it will start the process as soon you see {dnld} flashing on the display let go of the button and it should re-flash. I had a similar prob. VOXER did not work but DnUpMan did as it allows you to flash the unit in boot mode! Hope it works for you! BO BO BO! |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Eurovox problems | browser1 | Eurovox | 3 | 15-05-08 11:38 PM |
| eurovox problems | slippys2big | Eurovox | 3 | 30-03-08 10:16 PM |
| eurovox max 3 setup problems | mandycook | Eurovox | 12 | 04-08-07 09:37 AM |
| Eurovox remote problems | asifbricky | Eurovox | 4 | 20-04-07 05:28 PM |
| eurovox problems | hendo | Eurovox | 6 | 11-04-07 06:51 PM |
| LinkBack |
LinkBack URL |
About LinkBacks |
| Bookmark & Share |
Digg this Thread! |
Add Thread to del.icio.us |
Bookmark in Technorati |
Tweet this thread |
