Can anyone help?... Invalid Mac

[stoned_face]

[QUOTE=clio1;594087]Have you tried this yourself can you tell me and did it work. i would very much doubt it.[/QUOT well if u put a bit of wire on one of the chips it will but the thing is you dont know the chip because u dont have a clue about the inside of a box

[QinteQ]

Originally Posted by clio1

Have you tried this yourself can you tell me and did it work. i would very much doubt it.

Shorting ? - crap .......... if he did short he will kill both sides of the EEprom .. .. then it really is an irreparable brick.

You would need at least a new replacement from EEprom from Korea and the ability to change it. Or do a ' hot flash ' EEprom switch with two live box's, this is a cheat way of rewriting the bad side of the EEprom, but the risk is even bigger - if you get it wrong you kill the good [ donor ] box as well. So .. .. two fubare'd wonk's.

[clio1]

Originally Posted by stoned_face

well if u put a bit of wire on one of the chips it will but the thing is you dont know the chip because u dont have a clue about the inside of a box

What an engineer !!Thats not going to put the cert back on the box is it ?? as you would have erased it at best, so he still be in same boat, even if it did work, which it wont chance is he will kill the box.

[KDC]

Wasn't going to go down this road anyway guys although i do appreciate the fact Stoned face is trying to help. If the worst comes to the worst i'll just need to buy a new box from a reputable supplier such as Lincsat and put this down to a lesson learned.

[QinteQ]

Originally Posted by KDC

Wasn't going to go down this road anyway guys although i do appreciate the fact Stoned face is trying to help. If the worst comes to the worst i'll just need to buy a new box from a reputable supplier such as Lincsat and put this down to a lesson learned.

Yep, sorry you are in it M8, see #13

[stevieboy10]

Originally Posted by stoned_face

or the easy way would be bye other box and send your broke box bk to where you get the new one none of the supplier can tell when the fta bk in it

dnt think its that easy as traders will have serials etc. for boxes they have sold, to stop corruption like this from happening.


have you tried to contact kv themselves, they are very customer friendly. i remember contacting them regarding a750 and iconnectors, then they informed me of a780 lan before it was released and also gave me it at trade price

[KDC]

Originally Posted by stevieboy10

dnt think its that easy as traders will have serials etc. for boxes they have sold, to stop corruption like this from happening.


have you tried to contact kv themselves, they are very customer friendly. i remember contacting them regarding a750 and iconnectors, then they informed me of a780 lan before it was released and also gave me it at trade price

Do you have contact details for Kryptview direct mate?

Edit - Scratch that mate i've found contact details for kryptview.co.uk, thanks!

[clio1]

Originally Posted by KDC

Do you have contact details for Kryptview direct mate?

Edit - Scratch that mate i've found contact details for kryptview.co.uk, thanks!

youre wasting your time emailing that email address they dont reply, your best bet is lincsat

[KDC]

Originally Posted by clio1

youre wasting your time emailing that email address they dont reply, your best bet is lincsat

Ok Clio1 thanks for letting me know.

[andyjill]

Hi KDC, did lincsat get back to you from your sent pm about swapping boxes?