Eurovox 2 help!!!! - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

rob2629 · 07-05-07, 06:03 PM

Hi wonder if anybody can help, have a eurovox 2 that was working fine, not used as spare. When I went to use it the remote does not work so unable to get into anything in menu. The remote is fine as it works on the other box (the remote from other box doesn't work on this either) I re flashed the box but no better Used the original file to reflash (10 months+ old). At a loss as what to do please can anybody help?

bugsbunny · 07-05-07, 06:08 PM

hi wonder if any1 can help i have a eurovox max it was working fine but after about an 1hr later it stop working ie thers no power going through i changed the fuse in the plug and tryed another lead but no luck ,please can any1 help?

alex123 · 08-05-07, 07:49 AM

Rob if there is nothing showing on display not even a red standby light then your psu has blown either a cap or small round wickman fuse next to where mains power lead joins the board ,its marked 2000 or 1000 ma.
bugs bunny if your box still changes channels with up and down arrows on the front of box and remote is ok then its your remote sensor on box thats gone
alex

rob2629 · 08-05-07, 10:44 AM

Thanks for that Alec, it does seem it is the latter of the two. any ideas where I can get the sensor from?. Once again thank you for your help

Rob

bugsbunny · 08-05-07, 01:58 PM

thanks mate any idea wher i can get it fix

07-05-07, 06:03 PM	#1 (permalink)
rob2629 Junior Member Join Date: Jan 2007 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Eurovox 2 help!!!! Hi wonder if anybody can help, have a eurovox 2 that was working fine, not used as spare. When I went to use it the remote does not work so unable to get into anything in menu. The remote is fine as it works on the other box (the remote from other box doesn't work on this either) I re flashed the box but no better Used the original file to reflash (10 months+ old). At a loss as what to do please can anybody help?

07-05-07, 06:08 PM	#2 (permalink)
bugsbunny Junior Member Join Date: May 2007 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Eurovox 2 help!!!! hi wonder if any1 can help i have a eurovox max it was working fine but after about an 1hr later it stop working ie thers no power going through i changed the fuse in the plug and tryed another lead but no luck ,please can any1 help?

08-05-07, 07:49 AM	#3 (permalink)
alex123 Senior Member Join Date: Jan 2007 Posts: 198 Thanks: 0 Thanked 8 Times in 7 Posts	Re: Eurovox 2 help!!!! Rob if there is nothing showing on display not even a red standby light then your psu has blown either a cap or small round wickman fuse next to where mains power lead joins the board ,its marked 2000 or 1000 ma. bugs bunny if your box still changes channels with up and down arrows on the front of box and remote is ok then its your remote sensor on box thats gone alex

08-05-07, 10:44 AM	#4 (permalink)
rob2629 Junior Member Join Date: Jan 2007 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Eurovox 2 help!!!! Thanks for that Alec, it does seem it is the latter of the two. any ideas where I can get the sensor from?. Once again thank you for your help Rob

08-05-07, 01:58 PM	#5 (permalink)
bugsbunny Junior Member Join Date: May 2007 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Eurovox 2 help!!!! thanks mate any idea wher i can get it fix

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eurovox Max3 Loading New Software	morgan	Eurovox	7	06-12-08 02:52 PM
EUROVOX MAX RED Firmware work with EUROVOX 2?	c3ham	Eurovox	6	09-04-08 11:23 AM
Eurovox loosing channels mines is fixed for now	brian873	Eurovox	7	02-03-07 12:24 PM
Eurovox max	warriors07	Eurovox	1	16-02-07 07:42 PM
eurovox help	john36	Eurovox	0	18-01-07 05:04 PM