how do i obtain box key from Ntl / pace 1000 / 200 / d14000n

[jimbo]

Originally Posted by rebelrickb

Hi managed to extract my bkand ird number from my previuosly cracked card in xncs . But i carn`t do anything else with it like program it as nagra edit comes up with error

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
CAM Date request failed
Closing of COM1 was successful


Any help would be apreciated.

because i got bk and ird should i just by a funcard.

ive never seen cam date fail, were u trying to write an image to the card?

[rebelrickb]

All my settings are correct in phoenix mode. But still no joy.

When i press reset in niagra i get the cam date error. And when i read the card i get this

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM1 was successful

Does this mean its locked. But the card opens up ok in xncs so ive got my bk and ird no. Just ordered a funcard 6 to see if i can program that.

[daviddawn]

you should have ordered the funcard 4 its more reliable than funcard 6 but dont throw your card away it might need unlocking just with some software check the card status in the engineers menu if you have a pace box hold the up and down button on boot up and for the sammy just hold the down button down on boot up.

[spikebaby]

[quote=rebelrickb;119891]All my settings are correct in phoenix mode. But still no joy.

When i press reset in niagra i get the cam date error. And when i read the card i get this

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM1 was successful

Does this mean its locked. But the card opens up ok in xncs so ive got my bk and ird no. Just ordered a funcard 6 to see if i can program that.

you need the bo9.ac3.dc2 patch to put in to nagra edit this will send a command, via the command button and open your card youmight loose your ird but you can get that from eng menu

[rebelrickb]

My card status did say ok. But now it says no t stream and whilst viewing channels says card is not inserted correctly. This is only since ive been reading it on the pc.

where can i find this bo9.ac3.dc2 patch as i haven`t got 50 posts yet.

[jimbo]

dont need 50 posts anymore, dont know if what ur looking for is in the downloads.

[rebelrickb]

nice one so it is. Ive got a pace 4001. Where do i find the ird number in the menu, ive read it off the card in xncs but just want to make sure its the same

[jimbo]

not sure of page, u can use serial number from the bottom of the box 03 ect ect.

[daviddawn]

ird is on the scart socket inside the box you have to remove the lid, or in engineers menu serial code is what you look for i think its on page 2.

[daviddawn]

hi, some of my channels are freezing and skipping, in the settings menu i go to technical stuff and then it says agc signal level 99% is that the problem how do i make it 100%, cheerz.