Kryptview problem after flashing box - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

jimm139 · 07-09-11, 11:15 PM

Hi All,
I have a problem with my kryptview box. i have just bought this box and flashed it. the problem is when i plug into tv and try to power up the box i cant get a signal through to tv. i am worried that since i cant get a signal coming through that maybe i have done something wrong when flashing the box. Is it possible to break the box when flashing. When i received the kryptview this morning i set it up on tv to see if it was working and i managed to get a signal no problem but since i have done the flash i cant get it to work.
I am a complete novice to this kind of thing and any advice anyone could offer would be appreciated greatly.

clio1 · 08-09-11, 10:27 AM

Are you using a scart lead for the box ?? if so make sure its on the correct AV setting ie av1 or ext1 on your tv

Macabre · 08-09-11, 10:58 AM

Quote:

Originally Posted by jimm139

Hi All,
I have a problem with my kryptview box. i have just bought this box and flashed it. the problem is when i plug into tv and try to power up the box i cant get a signal through to tv. i am worried that since i cant get a signal coming through that maybe i have done something wrong when flashing the box. Is it possible to break the box when flashing. When i received the kryptview this morning i set it up on tv to see if it was working and i managed to get a signal no problem but since i have done the flash i cant get it to work.
I am a complete novice to this kind of thing and any advice anyone could offer would be appreciated greatly.

you got feed into right place?

jimm139 · 08-09-11, 11:23 AM

Hi Guys,
Thanks for the replies,
I have the scart lead in the tv port on the KV box and the cable aerial trough the RF IN port too. I have an old Starview box which i had pluged in the same way and this gets a tv signal no problem but when i try to get my new Kryptview plugged in i am not getting any signal at all going to tv. It is a possibillity that i have these in wrong ports but i have tried other variations but none seem to work. is there any other way i may have not tried

jimbo · 08-09-11, 11:31 AM

ur provider cable goes into the rf in dont think its a loop through never tried it, scart as u say and ethernet cable in place.

andyjill · 08-09-11, 07:25 PM

On the kv box their is 2 scarts sockets, try the other one than you been useing.

Jonpc · 08-09-11, 08:21 PM

Take the cable feed straight from the wall socket to box (no splitter) FTA channels should be received
What does it show on front of the box if anything.

jimm139 · 12-09-11, 03:42 PM

Hi Guys,
I have tried both scart sockets but still nothing,
Also i dont have it set up with a splitter so its straight from the wall to the box and the box says ON at the front of the box but i cant get the menu to come up on my TV screen.
I have handed the box to a tv repair shop to see if they can find any faults with the box.

I am thinking its the scart sockets that are broken as they are very loose at back of box and move very easily and hope ive not goosed the box while flashing it lol

Macabre · 12-09-11, 03:44 PM

Quote:

Originally Posted by jimm139

Hi Guys,
I have tried both scart sockets but still nothing,
Also i dont have it set up with a splitter so its straight from the wall to the box and the box says ON at the front of the box but i cant get the menu to come up on my TV screen.
I have handed the box to a tv repair shop to see if they can find any faults with the box.

I am thinking its the scart sockets that are broken as they are very loose at back of box and move very easily and hope ive not goosed the box while flashing it lol

Sounding like you may have bricked it when you flashed it.

cally · 12-09-11, 04:25 PM

have you pressed the av button on your remote, you may have done it by accident, and put it in tv mode or something, try pressing it again!!

07-09-11, 11:15 PM	#1 (permalink)
jimm139 Junior Member Join Date: Sep 2011 Location: glasgow Posts: 7 Thanks: 2 Thanked 1 Time in 1 Post	Kryptview problem after flashing box Hi All, I have a problem with my kryptview box. i have just bought this box and flashed it. the problem is when i plug into tv and try to power up the box i cant get a signal through to tv. i am worried that since i cant get a signal coming through that maybe i have done something wrong when flashing the box. Is it possible to break the box when flashing. When i received the kryptview this morning i set it up on tv to see if it was working and i managed to get a signal no problem but since i have done the flash i cant get it to work. I am a complete novice to this kind of thing and any advice anyone could offer would be appreciated greatly.

08-09-11, 10:27 AM	#2 (permalink)
clio1 Senior Member Join Date: Nov 2008 Location: In My Car Posts: 1,636 Thanks: 168 Thanked 703 Times in 489 Posts	Re: Kryptview problem after flashing box Are you using a scart lead for the box ?? if so make sure its on the correct AV setting ie av1 or ext1 on your tv __________________ "Worry is like a Rocking Chair! Its something to do but gets you nowhere !!"

08-09-11, 11:23 AM	#4 (permalink)
jimm139 Junior Member Join Date: Sep 2011 Location: glasgow Posts: 7 Thanks: 2 Thanked 1 Time in 1 Post	Re: Kryptview problem after flashing box Hi Guys, Thanks for the replies, I have the scart lead in the tv port on the KV box and the cable aerial trough the RF IN port too. I have an old Starview box which i had pluged in the same way and this gets a tv signal no problem but when i try to get my new Kryptview plugged in i am not getting any signal at all going to tv. It is a possibillity that i have these in wrong ports but i have tried other variations but none seem to work. is there any other way i may have not tried

08-09-11, 11:31 AM	#5 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 4,006 Thanks: 254 Thanked 891 Times in 554 Posts	Re: Kryptview problem after flashing box ur provider cable goes into the rf in dont think its a loop through never tried it, scart as u say and ethernet cable in place. __________________ i now keep copies of some posts before they are deleted, this is a private matter.

08-09-11, 07:25 PM	#6 (permalink)
andyjill Senior Member Join Date: May 2010 Posts: 890 Thanks: 155 Thanked 366 Times in 278 Posts	Re: Kryptview problem after flashing box On the kv box their is 2 scarts sockets, try the other one than you been useing.

08-09-11, 08:21 PM	#7 (permalink)
Jonpc Senior Member Join Date: Mar 2008 Posts: 664 Thanks: 25 Thanked 241 Times in 192 Posts	Re: Kryptview problem after flashing box Take the cable feed straight from the wall socket to box (no splitter) FTA channels should be received What does it show on front of the box if anything.

12-09-11, 03:42 PM	#8 (permalink)
jimm139 Junior Member Join Date: Sep 2011 Location: glasgow Posts: 7 Thanks: 2 Thanked 1 Time in 1 Post	Re: Kryptview problem after flashing box Hi Guys, I have tried both scart sockets but still nothing, Also i dont have it set up with a splitter so its straight from the wall to the box and the box says ON at the front of the box but i cant get the menu to come up on my TV screen. I have handed the box to a tv repair shop to see if they can find any faults with the box. I am thinking its the scart sockets that are broken as they are very loose at back of box and move very easily and hope ive not goosed the box while flashing it lol

12-09-11, 04:25 PM	#10 (permalink)
cally Senior Member Join Date: Feb 2008 Location: Hartlepool Posts: 376 Thanks: 82 Thanked 28 Times in 27 Posts	Re: Kryptview problem after flashing box have you pressed the av button on your remote, you may have done it by accident, and put it in tv mode or something, try pressing it again!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flashing Kryptview Box Twice	cableman	Kryptview	4	25-03-11 05:44 PM
is there a kryptview hd box?	ash17	Kryptview	12	02-11-10 09:14 PM
connecting hdmi to v+ box problem	Bawsy	Cable TV Chat	2	19-10-10 11:28 AM
Kryptview - scanning problem	fib987	Kryptview	3	10-08-10 01:53 AM
kryptview 780 box problem	stefan1961	Kryptview	9	27-06-10 12:24 PM