Haxorware gui locked me out, why? - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

angelsinojos · 15-09-11, 04:17 PM

Hi, I have a really nice SB5101 with Haxor rev 39 and I"ve never had any problems... Last week, I changed the address and I can no longer access the control panel.

With the coaxial cable, and the ethernet connected all lights are steady but the online one, and I can't access the haxorware gui.

without the coax, and just ethernet, power light is on, receive light blinks an can't access haxorware GUI.

set an static IP, and still I cant access the gui..

As I said that has never happened before. Can I get it back without having to reflash? what do I have to do? Did the haxorware access address got changed?

thanks for your help and your time

BL4K3Y · 15-09-11, 04:19 PM

Can you still telnet into the modem? You haven't changed the IP address of the modem at any time have you? What IP settings did you use as static? Try:

Quote:

IP Address: 192.168.100.10
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.100.1

angelsinojos · 15-09-11, 04:34 PM

Hi Blakey, and thanks for your time. Those are the settings that I have tried, and still no access. what I changed was the mac as always... As I said that has never happened before. can you tell me the procedure to try telnet, I do have to admit that telnet is one of the few things I have not tried, because I dont know much. Do you mean using teraterm? or putty? thanks, and please help me get it back

BL4K3Y · 15-09-11, 05:31 PM

This thread contains lots of different Telnet commands. I can't fully remember how to access the modem via Telnet but you can use HyperTerminal in Windows or you can use software like Putty.

angelsinojos · 15-09-11, 05:43 PM

hey, I've tried telnet and the answer is: that the server 192. etc is taking too long to respond. take a look at these 2 pics. 1. is when connected to Ethernet, no coax. the other one using USB.

I just let it automatic to see what addresses would appear..

any thoughts?

BL4K3Y · 15-09-11, 05:51 PM

Can you ping 192.168.100.1 successfully?

angelsinojos · 15-09-11, 06:08 PM

well to, 100.1 nop

to 100.12 yes look at the pictures please, and please tell me what is the next step?. It is a very rare situation

thanks for your help

BL4K3Y · 15-09-11, 06:27 PM

It seems to me that the modem's IP address has been changed. Have you got a Blackcat lead you can use to re-flash the modem?

angelsinojos · 15-09-11, 06:55 PM

Hi, I have an usb to ttl ( max22) and a black cat USB, can I do it with one of these 2 tools? no jatg serial...

thanks for all your help.

BL4K3Y · 15-09-11, 07:20 PM

Your Blackcat USB should work just fine, as long as it has the pin header connection onboard that is.

15-09-11, 04:17 PM	#1 (permalink)
angelsinojos Junior Member Join Date: Sep 2011 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Haxorware gui locked me out, why? Hi, I have a really nice SB5101 with Haxor rev 39 and I"ve never had any problems... Last week, I changed the address and I can no longer access the control panel. With the coaxial cable, and the ethernet connected all lights are steady but the online one, and I can't access the haxorware gui. without the coax, and just ethernet, power light is on, receive light blinks an can't access haxorware GUI. set an static IP, and still I cant access the gui.. As I said that has never happened before. Can I get it back without having to reflash? what do I have to do? Did the haxorware access address got changed? thanks for your help and your time

15-09-11, 04:34 PM	#3 (permalink)
angelsinojos Junior Member Join Date: Sep 2011 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Haxorware gui locked me out, why? Hi Blakey, and thanks for your time. Those are the settings that I have tried, and still no access. what I changed was the mac as always... As I said that has never happened before. can you tell me the procedure to try telnet, I do have to admit that telnet is one of the few things I have not tried, because I dont know much. Do you mean using teraterm? or putty? thanks, and please help me get it back

15-09-11, 05:31 PM	#4 (permalink)
BL4K3Y Senior Member Join Date: Apr 2008 Location: Colne, Lancashire Posts: 7,004 Thanks: 247 Thanked 1,319 Times in 1,211 Posts	Re: Haxorware gui locked me out, why? This thread contains lots of different Telnet commands. I can't fully remember how to access the modem via Telnet but you can use HyperTerminal in Windows or you can use software like Putty.

15-09-11, 05:51 PM	#6 (permalink)
BL4K3Y Senior Member Join Date: Apr 2008 Location: Colne, Lancashire Posts: 7,004 Thanks: 247 Thanked 1,319 Times in 1,211 Posts	Re: Haxorware gui locked me out, why? Can you ping 192.168.100.1 successfully?

15-09-11, 06:27 PM	#8 (permalink)
BL4K3Y Senior Member Join Date: Apr 2008 Location: Colne, Lancashire Posts: 7,004 Thanks: 247 Thanked 1,319 Times in 1,211 Posts	Re: Haxorware gui locked me out, why? It seems to me that the modem's IP address has been changed. Have you got a Blackcat lead you can use to re-flash the modem?

15-09-11, 06:55 PM	#9 (permalink)
angelsinojos Junior Member Join Date: Sep 2011 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Haxorware gui locked me out, why? Hi, I have an usb to ttl ( max22) and a black cat USB, can I do it with one of these 2 tools? no jatg serial... thanks for all your help.

15-09-11, 07:20 PM	#10 (permalink)
BL4K3Y Senior Member Join Date: Apr 2008 Location: Colne, Lancashire Posts: 7,004 Thanks: 247 Thanked 1,319 Times in 1,211 Posts	Re: Haxorware gui locked me out, why? Your Blackcat USB should work just fine, as long as it has the pin header connection onboard that is.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
haxorware tools	nufc126	Cable Modems	5	09-09-11 04:56 PM
Cant access haxorware page	snedz1967	Cable Modems	2	06-08-11 02:09 PM
improper cvc format ( haxorware) rev38	ARGYLL	Cable Modems	0	15-04-11 03:42 PM
Haxorware tutorial step by step	ovvo	Cable Modems	0	27-08-10 03:35 PM
Flashing Haxorware	aamir007	Cable Modems	15	24-08-10 04:32 PM