any help please magic eye drawing

[red]

Hi please help, ive created a drawing and attached it, im going to be running a multiroom system with magic eyes and woundered if anyone could look at my drawing and see if this would work, im doing this way as i have all the bits. any help appreciated thanks in advance

[ABA]

lot of bits for nowt
all you need is say a 6 or 8 way amp in the loft SLX 8 Way Amplifier with IR By-Pass
aerial and dish to sky box out put no 2 to the amp in the loft magic eye on end of leads in rooms and away you go dont needs splitters or anything else but it will be the same sky channel on every telly signal from aerial will be independant but you change sky in any room and it will change on every telly if that telly is on sky

[Pittsey]

Agree with ABA.

One coax from RF2, with the voltage turned on, into a SLX amp. Then run the cables from the amp to the rooms you require. Plug in magic eyes. Job done. Just make sure that the connectors on each end are nicely done with none of the shield touching the core.