engineers menu - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

drippy · 07-06-07, 08:32 PM

How do i get into engineers menu on a pace.
I have read a few ways but none work.
Also how do i tell what Pace box it is?
Nothing on it anywhere.
If it helps it has got 2 card slots

escapologist · 07-06-07, 09:04 PM

Press the channel up and channel down buttons together and keep pressed in, put power to your box and the engineers menu will come up in 20 -30secs

Tee_111 · 08-06-07, 09:12 AM

it could be a 1000b or a 2000 model, turn power off, then on, hold down up and down buttons.

chrisnasah · 10-06-07, 07:47 PM

sorry but could you explain more by down up and down buttons? How?

reddiesel · 10-06-07, 08:46 PM

The buttons above and below select on front of box ,keep pressed in as you switch power back on. are you sure its not a sattelite box with two card slots ?

shooneel · 13-06-07, 08:27 PM

hi, a newbie
need some help regarding the engineers menu.
i have had this box for 2 years now, used to get the card updated from the guy whom i got the box from.
recently came across this forum.. hav to admit its brilliant..
but i am facing problems getting into the enigeneers menu.. have tried all the buttons as suggested, but it wont work.
can they be disabled or blocked ? because the guy i got the box from works as ntl installer, so probably he has done something to it. also tried but finding it very hard to open the box to check inside
any help or suggestions please

5av1dg312 · 13-06-07, 09:17 PM

i had probs when i first started just keep them buttons pressed on your box, i had one box diag came up then as soon as i took fingers off buttons it went off. but when i tryed it again it worked???? explain that!

Trafpol · 13-06-07, 10:20 PM

As to opening the box - take the money instead! lol

No get security screwdriver set - Maplins

reddiesel · 14-06-07, 12:26 AM

You need scart connected !

rv1nd · 14-06-07, 01:16 PM

You need to press and hold down the Ch+ and Ch- buttons in front of the box and then plug in the power cable at the back....hold it until it say "diag" and then you will get the menu.

07-06-07, 08:32 PM	#1 (permalink)
drippy Junior Member Join Date: May 2007 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	engineers menu How do i get into engineers menu on a pace. I have read a few ways but none work. Also how do i tell what Pace box it is? Nothing on it anywhere. If it helps it has got 2 card slots

07-06-07, 09:04 PM	#2 (permalink)
escapologist Junior Member Join Date: Mar 2007 Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts	Re: engineers menu Press the channel up and channel down buttons together and keep pressed in, put power to your box and the engineers menu will come up in 20 -30secs

08-06-07, 09:12 AM	#3 (permalink)
Tee_111 Super Moderator Join Date: Dec 2006 Location: West Yorks Posts: 2,291 Thanks: 93 Thanked 255 Times in 184 Posts	Re: engineers menu it could be a 1000b or a 2000 model, turn power off, then on, hold down up and down buttons.

10-06-07, 07:47 PM	#4 (permalink)
chrisnasah Senior Member Join Date: Jun 2007 Posts: 212 Thanks: 12 Thanked 21 Times in 16 Posts	Re: engineers menu sorry but could you explain more by down up and down buttons? How?

10-06-07, 08:46 PM	#5 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,708 Thanks: 176 Thanked 957 Times in 839 Posts	Re: engineers menu The buttons above and below select on front of box ,keep pressed in as you switch power back on. are you sure its not a sattelite box with two card slots ? Last edited by reddiesel; 10-06-07 at 08:52 PM.

13-06-07, 08:27 PM	#6 (permalink)
shooneel Junior Member Join Date: Jun 2007 Posts: 20 Thanks: 3 Thanked 0 Times in 0 Posts	Re: engineers menu hi, a newbie need some help regarding the engineers menu. i have had this box for 2 years now, used to get the card updated from the guy whom i got the box from. recently came across this forum.. hav to admit its brilliant.. but i am facing problems getting into the enigeneers menu.. have tried all the buttons as suggested, but it wont work. can they be disabled or blocked ? because the guy i got the box from works as ntl installer, so probably he has done something to it. also tried but finding it very hard to open the box to check inside any help or suggestions please

13-06-07, 09:17 PM	#7 (permalink)
5av1dg312 Clueless Cable Moderator Join Date: Apr 2007 Location: Pure Posts: 1,580 Thanks: 23 Thanked 81 Times in 45 Posts	Re: engineers menu i had probs when i first started just keep them buttons pressed on your box, i had one box diag came up then as soon as i took fingers off buttons it went off. but when i tryed it again it worked???? explain that! __________________ [SIGPIC][/SIGPIC] *Clueless Cable Moderator*

13-06-07, 10:20 PM	#8 (permalink)
Trafpol Senior Member Join Date: Apr 2007 Posts: 101 Thanks: 0 Thanked 0 Times in 0 Posts	Re: engineers menu As to opening the box - take the money instead! lol No get security screwdriver set - Maplins

14-06-07, 12:26 AM	#9 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,708 Thanks: 176 Thanked 957 Times in 839 Posts	Re: engineers menu You need scart connected !

14-06-07, 01:16 PM	#10 (permalink)
rv1nd Senior Member Join Date: May 2007 Posts: 102 Thanks: 5 Thanked 1 Time in 1 Post	Re: engineers menu You need to press and hold down the Ch+ and Ch- buttons in front of the box and then plug in the power cable at the back....hold it until it say "diag" and then you will get the menu.