First mosc card

[Jimmybomb]

Hi guys

Just about to do first mosc card, couple of questions

This is a previously working chipped card, am I right in saying it just needs
re-flashing, if so do i have to prevent the infinity device from auto detecting the card. Or is it better to wipe and re-program the card from scratch.

Which file do i use to re-flash. Not sure i know the right one?

James

[Jimmybomb]

Tried reading the card with programmer

It says "no cpu can be detected on the card"

Does this mean it's shagged

[javed]

you are trying to read the card in wrong software mate. Your MOSC card should be read in Nagra Edit Software. but befor that you need to operate the programmer on a specific frequency. Best thing to do is read the tutorial on my website. it will tell you every thing how to programm a MOSC card.
thanks

[Jimmybomb]

Thanks Javed

Have got your tut up.

Let me have a play will let you know

[Trafpol]

You want programmer in phoenix mode probably on 3.68 mhz freq. If you can copy card first then do so as if its not set up properly reading it can erase it. Be careful

[javed]

Trying your mosc tut Javed

but all i get is this any ideas

Opening of COM2 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM2 was successful


Mate post all the messages in the thread so other people can get help as well if you wil pm me then other will lose that bi. i hope you undersatand

You need to repair and unloop this card. first try MROM software from my website. if it works than all right if not then you have to unloop the card through an unlooper. Cheers

[Jimmybomb]

Wow like the funky new look

Anyway trying to read car with nagra 4.1 but all i get is this

Opening of COM2 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM2 was successful

checked com ports and freqs ok

[Jimmybomb]

Can't seem to get the mmrom software to work off your site javed

But it seems like the card is locked (bstard).

I take it this is t911 or ubomb situation then now.

If i wanted to code on a funcard 4 (or other) in the meantime until
i got one of these, is this possible.
I have the bk and ird numbers

Cheers

[reddiesel]

Yes you can programme a funcard 4, use the exteep from au fun , and chaos v3 flash,use the one for your area n#l etc, you dont need inteep anymore. you may need to do ,set pin and net id first, depending on which box you have. you can use the card for that first, and then wipe it and then do the exteep and flash. If you have already got the box working ie free stuff bbc itv etc, you only need to do exteep and flash, dont forget to cut talkback!

[Jimmybomb]

Cheers Red

When programming funcard 4 do i have to do anything with the bk
and ird, like programme it to the card if so how?

James