TitaniumCard 2

[Ciwan]

Hello everyone

I searched the whole fourum for stuff on TitaniumCards 2 and couldn't find anything, maybe they are not very popular between you professionals

I have a titaniumcard 2 and after reading in a few different places I found out that I need the following:

The titanium 2 emulation files (I hear they come in sets of 3).

The loadeep file for tit2 (I hear that sometimes comes with the zip file that came with the actual emulation files downloaded)

Titanium 1+2 card loader (Ver.2) software.

A Rom 10 image for my N*L provider. I have a file called [ n*l_full pack.bn10 ] that was in a Rom 10 folder that I downloaded from the forum. But I don't know if that would be the Rom 10 image I need.

I searched google for these, but with no luck. Please guys, If you could help me in getting these, I would be very greatful.

Thanks a lot.

Ciwan

[5av1dg312]

How to Program 'Titanium 2' Card:

Programs/Software Required:
1. Titanium 1+2 Cardprogger (including files linked to this)
2. Nagra Edit
3. Winexplorer
4. Phoenix Programmer

Step One:
Make sure programmer is set to phoenix mode (3.58 mhz) and then insert titanium2 card.
Step Two:
Run 'Titanium 1+2 cardprogger', Identify card should come up as 'OS: 02.01 ATR: ******************'
Step Three:
Although not essential...do it anyway....erase card....progger will go through motions and
come back as card in 'virgin'state.
Step Four:
Load Flash (Tit2_Nagra_emu_hex.hex)
Load EEprom (Tit2_Nagra_emu_eep.eep)
Load CryptKey (Tit2_Nagra_emu_CryptKey.hex)
Step Five:
Click on 'Program'
Card will now program the card with the files selected......once this is complete close the software.
Step Six:
Now you must create a .bin image for your card.........
Run Nagra edit and load the relevent .bin image for your area from the 'bin images' folder....insert your IRD and BK
in the relevent boxes in 'data editor'.....DONOT ALTER ANY OTHER DETAILS IN IMAGE....some people find entering IRD backwards
works others will find putting it in straight will work (straight = 12 ** ** **, backward= ** ** ** 12)...
save the image with a name u will remember eg...my_bin_image.bin
close nagra edit.
Step Seven:
Run Winexplorer......load script 'loadeep' (found in 'Tit2 Nagra emu' folder).....run script...when prompted load the image u have saved
in previous step (eg....my_bin_image.bin).....once script has finished close all programs and remove card from programmer.
Step Eight:
Switch Cable STB on and wait for screen to tell you to insert card....insert card....wait approx 30-60 seconds whilst card updates and then change channel
using remote.....
Voila!!!!!!! u have a working AU Titanium2 Card

[Ciwan]

Hello again

Thanks for the reply.

Could you send me a link to where I could download TitaniumCard 1 & 2 software with the relavant files. and a Rom 10 image file. I allready have NagraEdit and Winexplorer and a Infinity Unlimited progger (runs pheonix mode).

Thanks a lot

[5av1dg312]

you got a pm mate.

[Ciwan]

Hello everyone

When I click on the [ Burn It ] button in Titanium 1 & 2 Card Progger after loading the three files of course. I get a message saying [ Error: Writing Flash Failed ! ] could you please help me fix this problem, I don't know why this is happening, I'm doing everything as the tutorial says.

I'm thankful for any suggestions.

Thank You.

[Ciwan]

Is it possible that my TitanCard could be blocked ????? If yes, How can I find out ?????

Thanks

[lincsat]

Is it like the Tit1 where you need a good ATR and can use different OS? If so, is your ATR good and have you got the right OS on it?

[chrisnasah]

what programmer are using to program the card. I had the same isssue with usb infinity unlimited. All i did was used the older driver for the programmer and worked like a charm.

However althought it worked for 20 mins it would lose its update. I dont know if someone created a fix where it auto updated. In any case i programmed a fun 4 card and still working great!

[Ciwan]

I don't know if it is like the Tit1 cause I never had one. What is an [ OS ] and how do I know if the ATR is good or not ( I can see the ATR numbers)?

Thanks Lincsat

[Ciwan]

I'm using the Infinity USB unlimited too. Could you tell me what driver version you're using and how I can get it. And If after rolling back to driver to an older version, would the preformance be as good as the new driver, cause I don't want to keep updating and rolling back the drivers for my Programmer.

Thanks Chris