same ip, is this normal??? - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

chrisnasah · 04-07-07, 07:08 PM

Hello,
No matter how many times i change Mac add's i still seem to get the same ip address once am connected to the internet. Is this normal?

lincsat · 04-07-07, 08:29 PM

The IP's are allocated dynamically, so when you disconnect your IP is released and when you re-connect (albeit with a different MAC) you get allocated the first available one - ie the one you just released.

chrisnasah · 04-07-07, 09:23 PM

cheers!, noticed one thing, if i changed the mac of modem, i still kept getting same ip, tried changing my overall pc mac addy using smac and took a while connecting but got a completely different addy.

Just been trying different things to sort this speed flactuations, fine in mornings but due to capping probably not so good at this times.

Cheers for the input.

chrisnasah · 04-07-07, 09:50 PM

Lin,

What do you think of these logs, get it everytime the modem is rebooted and before it connects.

Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/Q...
Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire FEC f...

This is the main connection page. You think its normal:

Startup Procedure

Acquire Downstream Channel 586750000 HzLocked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK cmreg-ntlhm250-bund03.cm
Security Disabled Disabled

Downstream Channel

Lock StatusLocked ModulationQAM64
Channel ID0 Symbol rate5056941
Downstream Frequency586750000 Hz Downstream Power-22.9 dBmV
SNR26.0 dB

Channel ID being 0 is this normal??

Upstream Channel

Lock StatusLocked ModulationQPSK
Channel ID3 Symbol rate2560 Ksym/sec
Upstream Frequency42800000 Hz Upstream Power51.0 dBmV

Standard Specification CompliantDOCSIS 2.0
Hardware Version3349
Software Version5.01.01.000_004(III)
Cable Modem MAC Address00:02:*********
Cable Modem USB MAC Address00:02**********
Cable Modem Serial NumberC*************

Any suggestions will be appreciated.

Thanks

chrisnasah · 05-07-07, 04:43 PM

Hello I guess it must be setup fine as for the first time i just hit the 10mg mark. Getting better after every reboot.

04-07-07, 07:08 PM	#1 (permalink)
chrisnasah Member Join Date: Jun 2007 Posts: 86 Thanks: 0 Thanked 1 Time in 1 Post	same ip, is this normal??? Hello, No matter how many times i change Mac add's i still seem to get the same ip address once am connected to the internet. Is this normal?

04-07-07, 08:29 PM	#2 (permalink)
lincsat Super-Dooper Moderator Join Date: Sep 2005 Location: In front of the PC Posts: 3,646 Thanks: 2 Thanked 888 Times in 173 Posts	Re: same ip, is this normal??? The IP's are allocated dynamically, so when you disconnect your IP is released and when you re-connect (albeit with a different MAC) you get allocated the first available one - ie the one you just released.

04-07-07, 09:23 PM	#3 (permalink)
chrisnasah Member Join Date: Jun 2007 Posts: 86 Thanks: 0 Thanked 1 Time in 1 Post	Re: same ip, is this normal??? cheers!, noticed one thing, if i changed the mac of modem, i still kept getting same ip, tried changing my overall pc mac addy using smac and took a while connecting but got a completely different addy. Just been trying different things to sort this speed flactuations, fine in mornings but due to capping probably not so good at this times. Cheers for the input.

04-07-07, 09:50 PM	#4 (permalink)
chrisnasah Member Join Date: Jun 2007 Posts: 86 Thanks: 0 Thanked 1 Time in 1 Post	Re: same ip, is this normal??? Lin, What do you think of these logs, get it everytime the modem is rebooted and before it connects. Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response. Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/Q... Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire FEC f... This is the main connection page. You think its normal: Startup Procedure Acquire Downstream Channel 586750000 HzLocked Connectivity State OK Operational Boot State OK Operational Configuration File OK cmreg-ntlhm250-bund03.cm Security Disabled Disabled Downstream Channel Lock StatusLocked ModulationQAM64 Channel ID0 Symbol rate5056941 Downstream Frequency586750000 Hz Downstream Power-22.9 dBmV SNR26.0 dB Channel ID being 0 is this normal?? Upstream Channel Lock StatusLocked ModulationQPSK Channel ID3 Symbol rate2560 Ksym/sec Upstream Frequency42800000 Hz Upstream Power51.0 dBmV Standard Specification CompliantDOCSIS 2.0 Hardware Version3349 Software Version5.01.01.000_004(III) Cable Modem MAC Address00:02:******* Cable Modem USB MAC Address00:02****** Cable Modem Serial NumberC*********** Any suggestions will be appreciated. Thanks Last edited by chrisnasah; 04-07-07 at 10:00 PM.

05-07-07, 04:43 PM	#5 (permalink)
chrisnasah Member Join Date: Jun 2007 Posts: 86 Thanks: 0 Thanked 1 Time in 1 Post	Re: same ip, is this normal??? Hello I guess it must be setup fine as for the first time i just hit the 10mg mark. Getting better after every reboot.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cables from the splitter	peakey	Eurovox	4	12-04-07 07:12 AM