unlooper ? for rom 11

[timste81]

I bought a T911 unlooper from unapit its a red one. I haven't a clue how to set it up, i've downloaded loads of files and can't seem to get any of them to work. Any help at all would be appreciated, could you please send me all files and how to use it. Thanks alot, tim

[reddiesel]

If you pm your email to me or javed, i use mike data dual script, on bod 11 it works well.
If one of the mods wants some of these files to put in downloads can you send me a link. thanks

[javed]

What youneed to do is you need to flash your unlooper first.
Then use the Sicript accoreding to the Rev version of your card.
for flashing unlooper youneed the newd13.hex file .
make sureall the buttons on the back of your unllooper are down then flash this file.
When its done run Winexplorer software and the sicript avaiable for the card it should unlock your card with in few seconds.
Thanks.
If you ned any files you can PM your Email Address.
thanks

[efliction]

Hi there PowerSync Unlooper, to unloop a Boc Rom 11 card, however could someone tell me what files and instructions i would need to flash the Unlooper and how to unloop the card.

Any help would be great

Thanks guys

[curly]

can any one tell me why i get --------! ! ! ! instead of ----++++,when trying to unloop,and why win ex says rom 11 not supported yet.cheers

[reddiesel]

Originally Posted by curly

can any one tell me why i get --------! ! ! ! instead of ----++++,when trying to unloop,and why win ex says rom 11 not supported yet.cheers

what unlooper have you got ? what script are you using and what flash is on it ? you probably need to set it up properly, you may need to adjust the pot if it has one.

[curly]

t911 unlooper,newd11,tried useing mikedata,it says hit 30/90 if i try the polished 1 its says do not no provider, my cards are rom 11 ,2 and 5 buttons are on, do u switch the buttons when running or just the pot,thanks

[sharkbait559]

can anyone tell me if theres any good unloopers that connecs via usb

[matthew4321]

have a look at this, its not my work but good bit of info



guild on how to use your unlooper

1 the 1st thing you do is to open winexplorer and
make sure you are on the right comport and you have set it to my unlooper

2 now you need to know what card you are trying to open...ie rom10 or rom11 and then the card rev....ie rom10 a86 or rom11 BOD

3 let's say it's a rom11 rev BOD,you will need to make sure that the dual is on bank B,you will now need to load up the BOD unlocker script with winexplorer,now put you card in the unlooper and hit the run tag in winexplorer
and sit back...

4 vcc....if your vcc is to high or to low,you will need to adjust this by the little blue pot till you get around 26 to 27,but as you are doing this the card may open as you are doing this........for the dual, wizard and tiny, your dip bank must always be on dip 2.....


5 when the card as open you will here a beep beep from your pc and a display in winexplorer saying that bugs as been zero

6 now take the card out and put it in your progarmmer,the best ones to ues is the DYNAMITE or the infinity USB phoenix as they have a usb and comport where the Infinity USB Unlimited dose not and this is where alot of peeps cant set this up right and get loads of probs like NO ATR and so on.

7 now use nagaredit 4.1 to read the card.....

8 this is all the help i will give on this,because at the end of the day i have not time to baby site peeps who don't take the time to read up on there hardware or software....

9 and there you have it if you cant do any of the above go away and do alot of reading or better still start something new like fishing...and then you can ask matt haze how to put a hook on your line.......

[anjum]

hi to all!
i got all programmer.i just want to know how to wright virgine smart card from negra 4.1?i need help.