Pogo Jtag-ing Samsung 2100C - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

Ciwan · 18-07-07, 09:59 AM

Hi all

I have a pogo Jtag, a Samsung 2100C and a LPT1 port on my computer.

I got BKE2.2 and when I click on Jtag it asks me for Config (1 or 2) and 3 radio buttons (Samsungs in different areas!). I live in na Nthell area, so which do I select cause there is no radio button for (Samsung nthell) ?

I tried all three radio buttons, but when I click on connect (after placing jtag on pins inside box.. of course) I get this error :

FATAL ERROR

NT Driver not found: MAC_MOT.SYS

Can anyone help me Jtag this box please, I really need the BK and IRD.

Thanks

reddiesel · 18-07-07, 10:08 AM

Click on tools, and jtag, then you get window up with mot in, click on it and have mot running .

Bubba.fatass · 18-07-07, 10:13 AM

I could just not get my head around the BKE programme until 51 tempted to me to try the OCD. I now use this for all my box work and it's never failed.

You will need to run the DRV programme with the MOT MAC and then start the 2100c up in debug mode before running the OCD but it really is a doddle.

Once up and running you simply insert the desired byte in the input line and up comes the required IRD or BK. The OCD is also essential for updating the NVRAM with a new MAC (I now use Dalmations MAC for speed).

If you look in the downloads section there is a tut for getting PINs back on the 2100c. This tut is also great for instructions of how to use OCD. You basically follow the tut up to the point of adding the nonnet mac to get OCD running and then insert the correct byte.

There is a list of bytes posted last week here and they differ depending on what area you are in and what software you are running. To check the software go into the settings mode on the remote control for the version number.

Hope this helps mate

Ciwan · 18-07-07, 10:16 AM

I click on tools Jtag but I get four options: Jtag Driver, Macromaker, Edit Config 1, Edit Config 2.

There is not MOT ??

By the way I over come the first error (it was a driver's issue) but now I have this error:

OCDemon

Internal Error 43

please help

Ciwan · 18-07-07, 10:18 AM

I get the feeling that I need to be having some other programe running in the background !!

If this is so, could you please tell me what the programe is called, and where I can get it from.

Thanks

Ciwan · 18-07-07, 10:23 AM

I have the OCD programe as well !! but I was told to get Box Key it is better to use BKE2.2 and to get IRD it is better to use OCD commander.

By the way, does the samsung box have to be powered on for the Jtag ?? (this might be a very stupid Q, but sorry I honestly don't know)

reddiesel · 18-07-07, 10:25 AM

Config 1, davic.

Asek · 18-07-07, 10:27 AM

if its a solder jtag and your getting error 43 its not connected properly

Asek · 18-07-07, 10:28 AM

after all is connected power up ur sammy without cable feed attached

reddiesel · 18-07-07, 10:29 AM

Yes power on and mot running in background,tools , jtag , jtag again. click on folder,mot in window,click on that, and set running.

18-07-07, 09:59 AM	#1 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 698 Thanks: 5 Thanked 7 Times in 7 Posts	Pogo Jtag-ing Samsung 2100C Hi all I have a pogo Jtag, a Samsung 2100C and a LPT1 port on my computer. I got BKE2.2 and when I click on Jtag it asks me for Config (1 or 2) and 3 radio buttons (Samsungs in different areas!). I live in na Nthell area, so which do I select cause there is no radio button for (Samsung nthell) ? I tried all three radio buttons, but when I click on connect (after placing jtag on pins inside box.. of course) I get this error : FATAL ERROR NT Driver not found: MAC_MOT.SYS Can anyone help me Jtag this box please, I really need the BK and IRD. Thanks

18-07-07, 10:08 AM	#2 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 2,842 Thanks: 32 Thanked 231 Times in 218 Posts	Re: Pogo Jtag-ing Samsung 2100C Click on tools, and jtag, then you get window up with mot in, click on it and have mot running .

18-07-07, 10:13 AM	#3 (permalink)
Bubba.fatass Senior Member Join Date: Jun 2007 Posts: 430 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Pogo Jtag-ing Samsung 2100C I could just not get my head around the BKE programme until 51 tempted to me to try the OCD. I now use this for all my box work and it's never failed. You will need to run the DRV programme with the MOT MAC and then start the 2100c up in debug mode before running the OCD but it really is a doddle. Once up and running you simply insert the desired byte in the input line and up comes the required IRD or BK. The OCD is also essential for updating the NVRAM with a new MAC (I now use Dalmations MAC for speed). If you look in the downloads section there is a tut for getting PINs back on the 2100c. This tut is also great for instructions of how to use OCD. You basically follow the tut up to the point of adding the nonnet mac to get OCD running and then insert the correct byte. There is a list of bytes posted last week here and they differ depending on what area you are in and what software you are running. To check the software go into the settings mode on the remote control for the version number. Hope this helps mate

18-07-07, 10:16 AM	#4 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 698 Thanks: 5 Thanked 7 Times in 7 Posts	Re: Pogo Jtag-ing Samsung 2100C I click on tools Jtag but I get four options: Jtag Driver, Macromaker, Edit Config 1, Edit Config 2. There is not MOT ?? By the way I over come the first error (it was a driver's issue) but now I have this error: OCDemon Internal Error 43 please help

18-07-07, 10:18 AM	#5 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 698 Thanks: 5 Thanked 7 Times in 7 Posts	Re: Pogo Jtag-ing Samsung 2100C I get the feeling that I need to be having some other programe running in the background !! If this is so, could you please tell me what the programe is called, and where I can get it from. Thanks


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

18-07-07, 10:23 AM	#6 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 698 Thanks: 5 Thanked 7 Times in 7 Posts	Re: Pogo Jtag-ing Samsung 2100C I have the OCD programe as well !! but I was told to get Box Key it is better to use BKE2.2 and to get IRD it is better to use OCD commander. By the way, does the samsung box have to be powered on for the Jtag ?? (this might be a very stupid Q, but sorry I honestly don't know)

18-07-07, 10:25 AM	#7 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 2,842 Thanks: 32 Thanked 231 Times in 218 Posts	Re: Pogo Jtag-ing Samsung 2100C Config 1, davic.

18-07-07, 10:27 AM	#8 (permalink)
Asek Technology Forums Join Date: Jul 2007 Posts: 89 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Pogo Jtag-ing Samsung 2100C if its a solder jtag and your getting error 43 its not connected properly

18-07-07, 10:28 AM	#9 (permalink)
Asek Technology Forums Join Date: Jul 2007 Posts: 89 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Pogo Jtag-ing Samsung 2100C after all is connected power up ur sammy without cable feed attached

18-07-07, 10:29 AM	#10 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 2,842 Thanks: 32 Thanked 231 Times in 218 Posts	Re: Pogo Jtag-ing Samsung 2100C Yes power on and mot running in background,tools , jtag , jtag again. click on folder,mot in window,click on that, and set running.