Signal / Picture breakup! - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Knutech · 21-07-07, 05:31 PM

Hi Guys,
Just installed a Eurovox Max V, I get all the channels but the non scrambled stuff like BBC1, 2, ITV etc brak up an pixelate. The signal quality stats 85% so I think the feed is ok?

Any body any ideas, all info welcome.

Many thanks in advance.

Rgds, Knutech

ronster · 21-07-07, 05:39 PM

have a read of this m8
http://www.techwatch.co.uk/dbox2-eur...html#post30729

micky b · 21-07-07, 05:40 PM

press the info button on the channel that's pixels, then make a note of the frequency number. Press menu and go to installation, enter your pin code and then go the relevant frequency from the ist and press green (channel edit )then blue (modify)
then change the frequency eg from 500 up or down, until the level and qualty bar highlights quickly.
Note if it stays red for more than two seconds the frequency is still out, change it up or down again but by 100 or so.

Knutech · 21-07-07, 05:46 PM

Many thanks for the info guys, I'll giveit a try.

Regards, Knutech

21-07-07, 05:31 PM	#1 (permalink)
Knutech Junior Member Join Date: Jul 2007 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Signal / Picture breakup! Hi Guys, Just installed a Eurovox Max V, I get all the channels but the non scrambled stuff like BBC1, 2, ITV etc brak up an pixelate. The signal quality stats 85% so I think the feed is ok? Any body any ideas, all info welcome. Many thanks in advance. Rgds, Knutech

21-07-07, 05:39 PM	#2 (permalink)
ronster Senior Member Join Date: Jan 2007 Location: Here Posts: 2,398 Thanks: 140 Thanked 981 Times in 529 Posts	Re: Signal / Picture breakup! have a read of this m8 http://www.techwatch.co.uk/dbox2-eur...html#post30729

21-07-07, 05:40 PM	#3 (permalink)
micky b Junior Member Join Date: Jul 2007 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Signal / Picture breakup! press the info button on the channel that's pixels, then make a note of the frequency number. Press menu and go to installation, enter your pin code and then go the relevant frequency from the ist and press green (channel edit )then blue (modify) then change the frequency eg from 500 up or down, until the level and qualty bar highlights quickly. Note if it stays red for more than two seconds the frequency is still out, change it up or down again but by 100 or so.

21-07-07, 05:46 PM	#4 (permalink)
Knutech Junior Member Join Date: Jul 2007 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Signal / Picture breakup! Many thanks for the info guys, I'll giveit a try. Regards, Knutech

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
eurovox max :signal keeps dissapearing	gonzo	Eurovox	3	07-12-08 11:59 PM
Eurovox Max picture breakup	dazling	Eurovox	5	09-07-07 08:48 PM
picture freeze and loss of signal help??	Speaky2	Eurovox	3	24-06-07 09:45 AM
Boosting NTL signal	zmitha	Eurovox	0	19-01-07 07:50 PM
It's time to look at the big picture	Serg	Home Media	0	04-02-06 04:40 AM