Debug mode but cant flash image nokia dbox2

[javed]

i am gone into depth know.....!
i have set my ip to 192.168.0.201 and the bootmanger automatically setting its ip to 192.168.0.202

i now pressed the up arrow button and can see some messages in terminal window.
it says that debug mode pass.
later on when i restart it again it gives this kind of secreen i am going to paste the log file.


ódebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>
dbox2:root>
dbox2:root> icache
icache is on
dbox2:root> go 10000100
Branching to 0x1000010ü
debug: DDF: Calibrating delay loop... debug: DDF: 14.85 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.201, My IP 192.168.0.202
debug: Sending TFTP-request for file C/ppcboot6590/ppcboot_nullmodem


on this line it keeps waitin.............
caz it canot transfer the file
if i type the command in root ICACHE
it says cache is on
if i type go 10000100 [Enter]

it starts this process again and comes in the end again for loading that file..
lincsat is trying to help is there nayone else who can throw some light on this issue . as i want to discus it here so other can read it ather than sending private messages

[jonnie22265]

javed if your box is in debug mode using ifa can you ping your dbox= pinging dbox11 ok

[javed]

No thats the problem as the box do not give any display on the secreen i dont know what the ip address is ?
it is stuck on one place inthe front LCD display 5 bars and then not pogressing.
some time it show kein system..in the LCD
it is a dbox 2 with Mbon 1

[jonnie22265]

if it shows kein system you have the wrong image on the box reflash with 2x image

[javed]

i am trying a 2x image.shal i try a 1x...? i am tryin the images i
have downloaded from the download section

[javed]

i have tried doing this aswel it is not flashing any image. if i type icache
it says on icache on
when i type go 1000001000
it startes the process again toconnect to the box tried 5 times and then says couldnot transfer through tftp. when i select a com1 option inbootmanager it gives an error message for te com port...! if i will take it off it works fine i mean starts reading and assigns a default ip 192.168.0.202 to the box
is ther enot a reset button like we do in starview boxes

[jonnie22265]

javed is the box in debug mode i assume your trying to get the box into debug mode with watt i see

[humforce]

if you are putting box into debug mode chreck its bmon1 or box will be door stop if you use wrong method.

this was taken from PT1 help file for doing nokia with intel bmon1
do this after the icache
chorus 800000 [Enter]
cp 10000000 01000000 1000 [ENTER]
nm 01000944 [ENTER]
00000000 [ENTER]
[ESC] [ENTER]
prot off 1:0 [ENTER]
cp 01000000 10000000 1000 [ENTER]
go 10000100 [Enter]


if the box is all ready debuged just use IFA

[javed]

yes i have read that but when i press chorus command it gives an eror messge it does not returns the thingmentioned in the tutorial
i also have tried IFA but it stucks on one point saying trasfering file which it doesnt ...

[humforce]

Originally Posted by javed

yes i have read that but when i press chorus command it gives an eror messge it does not returns the thingmentioned in the tutorial
i also have tried IFA but it stucks on one point saying trasfering file which it doesnt ...

its no good useing IFA if the box is not debuged.
if you are not getting past the chorus 800000 you must not be inputting the commands correct or the box is not a 2chip intel.?