javads bytes - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

KWACKER · 06-08-07, 07:54 AM

allright mate tried your bytes in bke 2.2, all three gave the same ird/bk (a lot of fs btw) .so i made up a fun4 with these numbers and all i get is the freeview channels all the rest are blank.in engineers menu hardware version 1.04,build version 3.5l,card status-please wait and on the error page it says 163 failure to range.what does this mean? (is this a poor signal? because its saying signals good).im in a nthell pure area.thanks for any help cheers mate.

5av1dg312 · 06-08-07, 11:22 AM

are you getting any card errors when inserting your card?

javed · 06-08-07, 11:47 AM

can you tell me the software version of he box (complete). from the Eng menue you can get that.
i will be able to tell you because there are two software versions 3_5b
and3_5L
tell me the version then i will send you the exact bytes and then we will check where you are getting wrong.

Thanks

KWACKER · 06-08-07, 11:57 AM

i used sdt put the bytes in underneath where it says dump keys and the first 16 digits came up the same as the bk i got from bke (one of them. every time you rebooted or turn it of and then jtag it a different bk comes up) so now ive changed the frequency to 643 and card status reads ok in engineers menu,but if i put it to my frequency 755 card status-please wait. error 163 failure to range keeps coming up on error page.what the f*** is that? cheers.

javed · 06-08-07, 12:10 PM

first you neeed tomake it sure that you got the right bk.
Then next step is to make your box work where do you want tostart .
Tel me the software version ?
and install the OCD commander. Did you used OCD commander befor ?

KWACKER · 06-08-07, 12:17 PM

right lads and lasses this is whats on the engineers menu. on page 5 installation status:cm lock status unlocked(this is in red) docsis downstream page 10:snr estimate (db) 34.7, (this is in orange).software versions page20.build version 3_5L_01_p07n_s_s2100.boot loader 1.07.

cheers no ive never used ocd commander

KWACKER · 06-08-07, 12:29 PM

btw bytes used where 0x0086b6b0 8 ,0x00adcd0 8 and finally 0x00f69af8 8.tried them all same results. Doh.cheers.

5avidge no errors with frequency 643 but using my own areas frequency 755 it just keeps telling you to wait (in engineers menu).

KWACKER · 06-08-07, 01:04 PM

looked up the error codes and error 163 failed to range = return path problem or cmts (wtf)loading problem.whatever that means.cheers.

5av1dg312 · 07-08-07, 12:10 AM

is 755 not the old frequency for notts Kwacker? i cant check it at the moment but im sure thats the old one for notts, not too sure tho! i cant check it on this computer

KWACKER · 07-08-07, 01:13 AM

yes its the same as glasgow, net id is different tho notts=0008,glasgow 0002.any thoughts on my ranging problem?.cheers.

06-08-07, 07:54 AM	#1 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	javads bytes allright mate tried your bytes in bke 2.2, all three gave the same ird/bk (a lot of fs btw) .so i made up a fun4 with these numbers and all i get is the freeview channels all the rest are blank.in engineers menu hardware version 1.04,build version 3.5l,card status-please wait and on the error page it says 163 failure to range.what does this mean? (is this a poor signal? because its saying signals good).im in a nthell pure area.thanks for any help cheers mate. __________________ stay cool,hang loose,admit nothing

06-08-07, 11:22 AM	#2 (permalink)
5av1dg312 Clueless Cable Moderator Join Date: Apr 2007 Location: Pure Posts: 1,580 Thanks: 23 Thanked 81 Times in 45 Posts	Re: javads bytes are you getting any card errors when inserting your card? __________________ [SIGPIC][/SIGPIC] *Clueless Cable Moderator*

06-08-07, 11:47 AM	#3 (permalink)
javed Techwatch Reader Join Date: Mar 2007 Location: Kashmir Posts: 393 Thanks: 6 Thanked 6 Times in 6 Posts	Re: javads bytes can you tell me the software version of he box (complete). from the Eng menue you can get that. i will be able to tell you because there are two software versions 3_5b and3_5L tell me the version then i will send you the exact bytes and then we will check where you are getting wrong. Thanks

06-08-07, 11:57 AM	#4 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Re: javads bytes i used sdt put the bytes in underneath where it says dump keys and the first 16 digits came up the same as the bk i got from bke (one of them. every time you rebooted or turn it of and then jtag it a different bk comes up) so now ive changed the frequency to 643 and card status reads ok in engineers menu,but if i put it to my frequency 755 card status-please wait. error 163 failure to range keeps coming up on error page.what the f*** is that? cheers. __________________ stay cool,hang loose,admit nothing

06-08-07, 12:10 PM	#5 (permalink)
javed Techwatch Reader Join Date: Mar 2007 Location: Kashmir Posts: 393 Thanks: 6 Thanked 6 Times in 6 Posts	Re: javads bytes first you neeed tomake it sure that you got the right bk. Then next step is to make your box work where do you want tostart . Tel me the software version ? and install the OCD commander. Did you used OCD commander befor ?

06-08-07, 12:17 PM	#6 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Re: javads bytes right lads and lasses this is whats on the engineers menu. on page 5 installation status:cm lock status unlocked(this is in red) docsis downstream page 10:snr estimate (db) 34.7, (this is in orange).software versions page20.build version 3_5L_01_p07n_s_s2100.boot loader 1.07. cheers no ive never used ocd commander __________________ stay cool,hang loose,admit nothing Last edited by KWACKER; 06-08-07 at 12:20 PM.

06-08-07, 12:29 PM	#7 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Re: javads bytes btw bytes used where 0x0086b6b0 8 ,0x00adcd0 8 and finally 0x00f69af8 8.tried them all same results. Doh.cheers. 5avidge no errors with frequency 643 but using my own areas frequency 755 it just keeps telling you to wait (in engineers menu). __________________ stay cool,hang loose,admit nothing Last edited by KWACKER; 06-08-07 at 12:35 PM.

06-08-07, 01:04 PM	#8 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Re: javads bytes looked up the error codes and error 163 failed to range = return path problem or cmts (wtf)loading problem.whatever that means.cheers. __________________ stay cool,hang loose,admit nothing

07-08-07, 12:10 AM	#9 (permalink)
5av1dg312 Clueless Cable Moderator Join Date: Apr 2007 Location: Pure Posts: 1,580 Thanks: 23 Thanked 81 Times in 45 Posts	Re: javads bytes is 755 not the old frequency for notts Kwacker? i cant check it at the moment but im sure thats the old one for notts, not too sure tho! i cant check it on this computer __________________ [SIGPIC][/SIGPIC] *Clueless Cable Moderator*

07-08-07, 01:13 AM	#10 (permalink)
KWACKER Senior Member Join Date: Mar 2007 Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Re: javads bytes yes its the same as glasgow, net id is different tho notts=0008,glasgow 0002.any thoughts on my ranging problem?.cheers. __________________ stay cool,hang loose,admit nothing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Latest Bytes	5av1dg312	Cable TV Chat	2	10-06-07 02:27 PM
Bytes for samsung 2100 3_5 software	javed	Cable TV Chat	12	10-06-07 02:27 PM
Bytes for New Virgin Media Software	javed	Cable TV Chat	6	10-06-07 01:55 AM
The Power Mac Storage FAQ	Apple Mac	Apple	0	24-08-06 05:07 PM