err codes - Page 3 - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

dash · 16-04-08, 09:29 PM

SA 8300 i have got this error message on the STB can anyone help me

Hamed 021 · 04-06-08, 06:48 PM

Hi there,

I Have been reading through all the posts relating to programming a titanium 2 card in this forum, but am in need of some help. i have downloaded the toolbar and i have all neccesary softwares, files and also the infinity usb phoenix programmer.

my titanium 2 card jus stopped working oneday and i couldnt find the person whom did it for me before, but the trouble is this. when i connect the programmer and insert the card and run the titanium 1+2 programmer, it reads no atr? and does not recognise the card. but on the actual infinity software which came wid the programmer, reads the card as a waffle card. am i doing something wrong here? also do you suggest i use a titanium 2 card or to use a funcard4. can some one please help me. thank you in advance.

sharkbait559 · 04-06-08, 07:11 PM

I think you have the card the wrong way in the progger and it doesnt read the card with infinity untill you click detect card but its not nessasery to do so.

sharkbait559 · 04-06-08, 07:12 PM

But if it read atr string invalid then the cards dead

reddiesel · 05-06-08, 05:40 AM

Quote:

Originally Posted by dash

SA 8300 i have got this error message on the STB can anyone help me

Primary loader error, should once updated be ok, have you had to blank the chip ?

coolman2534 · 08-06-08, 12:50 PM

hi, my pace box doesnt load up, it gets to ap:52 and then just sticks, after a while it says err3, can anyone help?

fredjeff · 02-07-08, 09:49 PM

Anybody know a list of the AP codes?

anthrax · 07-07-08, 03:57 PM

just wait a bit may flick to ap53 then reset and come on if not then u must turn off remove red jumper for minute or two, replace it then turn on box ....sometimes u may have to hold ch- button on front of box while u turn it back on!!

may help i hope! i have had this b4....

ulfbaz · 14-07-08, 06:55 PM

hi does anyone no the net id for the leigh area please
thanx ulfbaz

AyeRight · 31-07-08, 07:40 PM

Hi, I am getting the Er20 on Pace DI4001 - The net_id prog what kind of hardware is needed to fix this problem.

I have tried forcing updates, pulling out red jumper all to no avail any advice needed and appreciated.

Thanks,

AyeRight

16-04-08, 09:29 PM	#21 (permalink)
dash Member Join Date: Jul 2007 Posts: 36 Thanks: 1 Thanked 4 Times in 4 Posts	V+ er01 SA 8300 i have got this error message on the STB can anyone help me

04-06-08, 06:48 PM	#22 (permalink)
Hamed 021 Junior Member Join Date: Jun 2008 Posts: 10 Thanks: 2 Thanked 1 Time in 1 Post	Re: err codes Hi there, I Have been reading through all the posts relating to programming a titanium 2 card in this forum, but am in need of some help. i have downloaded the toolbar and i have all neccesary softwares, files and also the infinity usb phoenix programmer. my titanium 2 card jus stopped working oneday and i couldnt find the person whom did it for me before, but the trouble is this. when i connect the programmer and insert the card and run the titanium 1+2 programmer, it reads no atr? and does not recognise the card. but on the actual infinity software which came wid the programmer, reads the card as a waffle card. am i doing something wrong here? also do you suggest i use a titanium 2 card or to use a funcard4. can some one please help me. thank you in advance.

04-06-08, 07:11 PM	#23 (permalink)
sharkbait559 hacker! Join Date: Feb 2008 Location: south wales Posts: 726 Thanks: 35 Thanked 53 Times in 53 Posts	Re: err codes I think you have the card the wrong way in the progger and it doesnt read the card with infinity untill you click detect card but its not nessasery to do so.

04-06-08, 07:12 PM	#24 (permalink)
sharkbait559 hacker! Join Date: Feb 2008 Location: south wales Posts: 726 Thanks: 35 Thanked 53 Times in 53 Posts	Re: err codes But if it read atr string invalid then the cards dead

08-06-08, 12:50 PM	#26 (permalink)
coolman2534 Junior Member Join Date: Jun 2008 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	Re: err codes hi, my pace box doesnt load up, it gets to ap:52 and then just sticks, after a while it says err3, can anyone help?


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

02-07-08, 09:49 PM	#27 (permalink)
fredjeff Member Join Date: Jun 2008 Posts: 56 Thanks: 19 Thanked 0 Times in 0 Posts	Re: err codes Anybody know a list of the AP codes?

07-07-08, 03:57 PM	#28 (permalink)
anthrax Senior Member Join Date: May 2008 Location: UK NORTH Posts: 187 Thanks: 31 Thanked 16 Times in 15 Posts	Re: err codes just wait a bit may flick to ap53 then reset and come on if not then u must turn off remove red jumper for minute or two, replace it then turn on box ....sometimes u may have to hold ch- button on front of box while u turn it back on!! may help i hope! i have had this b4.... __________________ anthrax

14-07-08, 06:55 PM	#29 (permalink)
ulfbaz Senior Member Join Date: Mar 2007 Posts: 106 Thanks: 12 Thanked 1 Time in 1 Post	Re: err codes hi does anyone no the net id for the leigh area please thanx ulfbaz

31-07-08, 07:40 PM	#30 (permalink)
AyeRight Junior Member Join Date: Jul 2008 Posts: 3 Thanks: 2 Thanked 0 Times in 0 Posts	Re: err codes Hi, I am getting the Er20 on Pace DI4001 - The net_id prog what kind of hardware is needed to fix this problem. I have tried forcing updates, pulling out red jumper all to no avail any advice needed and appreciated. Thanks, AyeRight Last edited by AyeRight; 03-08-08 at 06:50 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
C&w Codes For Fta 101 Pleease Help	djsmallz	Eurovox	6	17-10-08 11:51 PM
Pin codes & feedback	Dabhog	Cable TV Chat	26	17-01-08 10:53 AM
tomtom activication codes	hobbitt2001	Wireless	5	30-05-07 03:19 PM
Key Codes ?	Schoon	Eurovox	2	11-02-07 12:34 PM