err codes

[picton]

hi plz can any one tell me if i have a clone box or not ? i have a eurovox max v 2008 an the main screw is black i no red is a clone is a black screw ok to flash ?

[Jadugar]

I am having problem with Pace ditv 1000 model. When you power it up, it displays "Pace", "nit" and then it goes berserk. It goes throught some numbers from 4000 to 100 and the back up. This happens for a while and in the end it displays a message "LAIt".

Any ideas????

Also i cant get into engineer's menu.

[anthrax]

4001 only works in a pure area i thought and the netid should set automaticallly on a 4001, the 4000 or 4010 need to be set with the netidfuncard method or with libby using an r232 to scart adapter

[rizlaman]

eny 1 know wat stuck on pace means wen power up thats all it does.was working fine till this morning?

[Roco]

Hi rizlaman

I take its a pace 4001 model?
Unplug box
Hold in the bottom arrow/channel button on front of your box
Add power while still holding in that button
Keep holding for a few minutes & then let go
Leave it for a few minutes & hopefully it will start

[rizlaman]

Originally Posted by Roco

Hi rizlaman

I take its a pace 4001 model?
Unplug box
Hold in the bottom arrow/channel button on front of your box
Add power while still holding in that button
Keep holding for a few minutes & then let go
Leave it for a few minutes & hopefully it will start

Cheers worked great nice 1!

[Roco]

phew your very lucky it came on man , these boxes can be a nightmare when the stuck-in-tune problem start.

nice one anyway m8,glad your sorted

[rizlaman]

Originally Posted by Roco

phew your very lucky it came on man , these boxes can be a nightmare when the stuck-in-tune problem start.

nice one anyway m8,glad your sorted

Yes nice 1 cheers for help.

[Hic_Calix]

Hi all,

This morning upon switching on I had an ERR1 error on my box. After switching on and off a couple of times it eventually went thru its update and all channels came on. However several hours later I noticed it had lost the channels, so I switched off and on in order to get it to update again. Upon switching on this time I'm getting 8888 on the display and all three lights alongside are on. Every time I power up now its showing ths same thing. Does anyone know what this means, if so is there anything I can do, or is it finally knackered? Cheers

[paul001]

Originally Posted by Hic_Calix

Hi all,

This morning upon switching on I had an ERR1 error on my box. After switching on and off a couple of times it eventually went thru its update and all channels came on. However several hours later I noticed it had lost the channels, so I switched off and on in order to get it to update again. Upon switching on this time I'm getting 8888 on the display and all three lights alongside are on. Every time I power up now its showing ths same thing. Does anyone know what this means, if so is there anything I can do, or is it finally knackered? Cheers

Did you ever get this sorted out I have the same problem on a friends box. Di4001N