Di4001N stuck on Pace - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Ciwan · 12-08-07, 01:51 PM

Hi all

I just bought a Di4001N. I pluged it in and it worked fine, I got all the free channels. But after doing the LED SIMM and cutting talkback..when I plug it in, all it says on the front display is PACE (stuck on that)

Please help

Thanks

jimbo · 12-08-07, 02:09 PM

try cleaning the simm and wriggling it about to make sure the clips are correctly seated, then hold in ch- button boot up and hold it in until you see boot.

Ciwan · 12-08-07, 02:10 PM

I did the red jumper thing. I took it out, left it for 1 minute, then put it back it back on.

Now when I plug in the box, it says [ Err2 ] on front !!

What's going on?

Please help

Ciwan · 12-08-07, 02:17 PM

Hi thanks Jimbo, it would seem you're correct about what you said.

With the box open I pushed the SIMM forward a little and kept it at that position and I got Pace>Tune, but the moment I lift my hand and SIMM returns backward a little I get Err2!!

How can I make the SIMM attach all the pins correctley ?? or is it a case of putting something (a little piece of rolled paper or something) that will push the SIMM forward and keep it at that position.

Please help

steve07951 · 12-08-07, 02:38 PM

you are going to have to do the netid when you sort out the simm

Ciwan · 12-08-07, 03:03 PM

Hi guys

I sorted it out! what I did was i placed a platic pen lid between the SIM and the box.

I didn't have to do anything after !! I didn't change netID and everything worked fine !

Thanks guys

steve07951 · 12-08-07, 03:13 PM

why, didn't the box reset after you pulled the jumper ?

jimbo · 12-08-07, 03:31 PM

err2 is simm problem 4001 resets netid itself, i knew it was a simple simm problem, glad you got sorted.

reddiesel · 13-08-07, 02:22 AM

When you replace the sim card you have to locate it at an angle and make sure it locates properly ,and as you tilt it towards the clips apply firm pressure downwards and you should feel it go down into the slot and it should clip back in easily and be firmly held.

Ciwan · 13-08-07, 12:08 PM

Yeah that's what I did. But I think the problem occured cause of the LED SIMM, its a little fatter, and does go into the slot easily. So I think it might have pushed a few pins back or something.

I've solved it now though

12-08-07, 01:51 PM	#1 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Di4001N stuck on Pace Hi all I just bought a Di4001N. I pluged it in and it worked fine, I got all the free channels. But after doing the LED SIMM and cutting talkback..when I plug it in, all it says on the front display is PACE (stuck on that) Please help Thanks

12-08-07, 02:09 PM	#2 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 4,006 Thanks: 254 Thanked 891 Times in 554 Posts	Re: Di4001N stuck on Pace try cleaning the simm and wriggling it about to make sure the clips are correctly seated, then hold in ch- button boot up and hold it in until you see boot.

12-08-07, 02:10 PM	#3 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Di4001N stuck on Pace I did the red jumper thing. I took it out, left it for 1 minute, then put it back it back on. Now when I plug in the box, it says [ Err2 ] on front !! What's going on? Please help

12-08-07, 02:17 PM	#4 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Di4001N stuck on Pace Hi thanks Jimbo, it would seem you're correct about what you said. With the box open I pushed the SIMM forward a little and kept it at that position and I got Pace>Tune, but the moment I lift my hand and SIMM returns backward a little I get Err2!! How can I make the SIMM attach all the pins correctley ?? or is it a case of putting something (a little piece of rolled paper or something) that will push the SIMM forward and keep it at that position. Please help

12-08-07, 02:38 PM	#5 (permalink)
steve07951 (super Mod) Join Date: Sep 2006 Location: around somewhere Posts: 2,376 Thanks: 0 Thanked 72 Times in 21 Posts	Re: Di4001N stuck on Pace you are going to have to do the netid when you sort out the simm

12-08-07, 03:03 PM	#6 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Di4001N stuck on Pace Hi guys I sorted it out! what I did was i placed a platic pen lid between the SIM and the box. I didn't have to do anything after !! I didn't change netID and everything worked fine ! Thanks guys

12-08-07, 03:13 PM	#7 (permalink)
steve07951 (super Mod) Join Date: Sep 2006 Location: around somewhere Posts: 2,376 Thanks: 0 Thanked 72 Times in 21 Posts	Re: Di4001N stuck on Pace why, didn't the box reset after you pulled the jumper ?

12-08-07, 03:31 PM	#8 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 4,006 Thanks: 254 Thanked 891 Times in 554 Posts	Re: Di4001N stuck on Pace err2 is simm problem 4001 resets netid itself, i knew it was a simple simm problem, glad you got sorted.

13-08-07, 02:22 AM	#9 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,708 Thanks: 176 Thanked 957 Times in 839 Posts	Re: Di4001N stuck on Pace When you replace the sim card you have to locate it at an angle and make sure it locates properly ,and as you tilt it towards the clips apply firm pressure downwards and you should feel it go down into the slot and it should clip back in easily and be firmly held.

13-08-07, 12:08 PM	#10 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Di4001N stuck on Pace Yeah that's what I did. But I think the problem occured cause of the LED SIMM, its a little fatter, and does go into the slot easily. So I think it might have pushed a few pins back or something. I've solved it now though

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
talkback pace di4001n	mrtease69	Cable TV Chat	34	01-01-10 10:10 PM
Pace Di4001-N stuck on tune	Ciwan	Cable TV Chat	35	03-05-09 11:28 AM
Pace Box Stuck On Boot	M.A.H	Cable TV Chat	33	13-11-07 02:24 PM
pace di4001n (ird bk keys)	alder191	Cable TV Chat	23	13-07-07 08:16 PM
Problems with Pace DI4001N	-jAk-	Cable TV Chat	3	02-05-07 09:32 AM