Libby + Com Port Help PLZ

[faisalpandu]

I recently got a pace 1000 box. When i ran the box it would go into an update and then display ERR4 on the box. I was told that the net id has not been set correctly. i tried to set the net id using using libby, i connected the rs232 cable to the pc and then oped the libby software, i plugged the power of the box in and nothing happened and in the tutorial it says data should automatically run. On the Box it just says PACE. when i click on get net id an error message come up com port error. I have tried all the com port numbers on the libby software from 1 to 4 using the same method of running the software and then running power to the box but nothing happens On the PC when the cable is plugged in i checked the settings on the PC on to which com port the cable is located it only goes from 6 to 9 and in the software you only have options 1 to 4. I am seriously confused as to what to try next as i have followed the tutorial step by step.

PLEASE HELP AAAAAAAAAAAAH!!

[Tee_111]

What is your IRD? ill have a look in the database..

What type of jtag are you using to obtain the IRD + BK? you will only probably be able to set the net id by using a jtag, or 100 pin fx file, which i assume does not work? via funcards..

[faisalpandu]

Hello mate i already have the BK. It is only the net id that needs setting. Will i not be able to set it with libby. how is it possible to set the net id via jtag

[Tee_111]

if your setting the net id via jtag, then you can use ocd commander and set it through there, if your patient, some one might have the file to set net id via funcard for a 1000...

[faisalpandu]

I have tried to set the net id via funcard but as the box is in an update loop this did not work, this is why i tried to use the libby method which is aslo not working as mentioned above. HELP PLZ!!!!!! Anybody have a solution

[reddiesel]

Are you using libby in windows 95 98 mode.

[faisalpandu]

Yes i am using it windows 95 mode.

[My_First_Time]

hi guys,

im having the same problems as above .....im trying to change my pace 1000 net id from 09999 to the right one for my area C&W


Did any of you guys fix your probs ?

Thanks guys!

[reddiesel]

See your other post.

[spikebaby]

Originally Posted by Tee_111

if your setting the net id via jtag, then you can use ocd commander and set it through there, if your patient, some one might have the file to set net id via funcard for a 1000...

hi mate the 1000 and 2000 models can be done via net id and libby mate no jtag,

firstly check com posrt also do you have the files for the net id, you then put 232 on box select you area file from libby then hit execute command ..then plug your box in with the electrical lead, what ch all the bumff on the right hand screen wait for it to stop then click the net id box, find your s in the list double click then click get net id at the bottom

that simple