All Nthell Channels & Frequencies (ireland)

[casso]

Originally Posted by casso

6875 is not in factory default settings,how do apply this

in channel edit im only at 85percent

[casso]

Originally Posted by Channelhopper

Got a phone call from a friend 200 miles away to say that that nthell scramble will take place tonight, Thursday.
There does seem to be a move afoot in the Dublin area.
Hope, again, that this turns out to be unfounded.
I will not be posting any more warnings, as I don't want to be causing un necessary concern.
Just keep an eye on the system over the next few days.

hi tuned in eurovox an d didnt get disney channels or LFC or god channel got 120 channels just wondering is there more.my feed comes from ch**us..

[satsmo]

Originally Posted by casso

hi tuned in eurovox an d didnt get disney channels or LFC or god channel got 120 channels just wondering is there more.my feed comes from ch**us..

Depends on your area, but try adding 444.000 to your frequency list, then do a manual scan on that frequency.

[Channelhopper]

Hi everyone.
I wanted to start a new post but I could not see a way in which to do it.
The problem is that the programme guide is out by an hour all the time.
Even if I change the time on the clock - which is also ahead by an hour - to the current time, the programme list is still an hour in advance.
Any advice on how to bring the clock and the guide into line would be much appreciated.

[satsmo]

Its a problem specific to the Irish EPG stream, in the UK it can be fixed by setting GMT to 00:00, but in Ireland you need to follow these instructions:

1. Pull plug on the back of the EV for a few seconds then plug back in again..
2. When EV powers up, immediately press menu, config and time settings.
3. Set correct time using GMT settings.
4. Then turn GMT OFF.
5. Press blue button to save and exit.

It may take more than one attempt so just be patient, it does work. One thing to note though when you have the EPG correct, is to just put it in standby at night, if you unplug it you will have to go through the whole process again.

[podge--08]

Hows it goin lads??i using a eurovox max v and it can only pick up about 50 channels that will stick..im pretty sure its the frequences that im putting in that are not up to date..i have the latest firmware installed so thats not the problem.Im using Ch***s digital line in Cork City and its true wire.Does anyone have the frequences for my area.Any help would be much appreciated.Thank You!!

[satsmo]

Press menu, config, clear data and clear channel data. Then do a normal powerscan with symbol rate 6875 and a frequency range from 274.000 to 460.000.

Please make sure you are plugged into the direct feed for the scan.

[Doire]

Alright Lads,

Just got the Euro Vox there this evening, but i can only get 8 channels, i have been reading through the posts and know that you need the make model etc so here goes:

Model: DVB-XC BoxV TDA (Euro Vox)
s/w Ver: 1.0 STC4 Sept 06 2007
H/W Ver: 2.0t K5
Bootstrap: V001

I was looking through the frequencies and it seems that there are a few with very bad quality:

291 80%
307 3-20%
307 80%
315 3-20%
323 80%
339 80%
347 3-20%
355 80%
363 3-20%
371 80%
379 3-20%
395 3-20%
403 3-20%

I'm living in Balbriggan, provider is N*L

I've a funny feeling that its the area that i'm in and not hte box

Can anyone help!!!

[satsmo]

Is your area MMDS feed from a local transmitter, or are you feed from an MMDS area on your roof, dont think your area is true cable. However it if it is MMDS it will work as you are in an N** area. BTW you need to update your firmware.

[Doire]

I think that its through a local transmiter. Not 100% tho. I've tried everything that has been mentioned on the thread, but no luck. I think that it just won't work in my area.

BTW how do i update my firmware (stupid question probably)