funcard netid tutorial

[waqasahmed]

I did open toxic but was confused about key 0 and key 1, do I input 1's into key 1 and 0's into key 0? Also, for the inteep can I not use Netid 2.1?

[abbs2002]

in Toxic where it says key 00 and key 01 that where the public keys go but you can also use all 0's and all 1's to see if the image you are using does update, I normally use public key key 0 goes in (00) and key 1 goes in (01) it is as simple as that m8.
Toxic is for setting up a viewing card so you don't need to use inteep just the exteep you've made with Toxic and the flash/image for your area, leave the inteep empty then write to card.

[reddiesel]

All you need to do in toxic is ird, bk, cam id, and area button, no inteep and use nov 08 fix flash.

[waqasahmed]

I havent done this yet, so Im just wondering what do I write for CAM?

[waqasahmed]

Also, I take it that every time I want to flash a funcard I dont need to flash the inteep file? Or is that just for setting the netid?

[G77]

inteep is for the netid funcard only.

for the camid you would use 27xxxxxx for c+w, 2cxxxxxx for tw and 24xxxxxx for pure

[waqasahmed]

literally 27/2c/24xxxxxx? Also, I think Im having resetting stb woes I switch the receiver off, take the red jumper out(and leave it out), switch it back on and I get no resetted netid? Ive also sometimes left the jumper out and the receiver switched off for 20 mins! Anyone got an idiots guide?

[G77]

replace xxxxxx with random hex but start with 27/2c/24

[waqasahmed]

does anyone know where Im going wrong with the red jumper trick? I dont get a resetted netid when I do the trick, but occasionally the netid changes to something else?

[reddiesel]

Try the card it should still reset.