funcard netid tutorial - Page 4 - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

ouzi1212 · 22-05-08, 05:36 PM

not sure if it would work with atmega, try using libby method to change net id u dont need the card with this way.

Stewie · 22-05-08, 05:47 PM

Hi, what tools do I need for libby? I only have my laptop with me?

ouzi1212 · 22-05-08, 05:50 PM

libby is a softwere which is in downloads, u will need ur box to be connected with a rs232 connector, then u can change the net id and more, u dont need to use the card.

jontydog · 23-05-08, 03:09 AM

Just a quick note on setting netid on sammy 2110C I have just done it this way with just the card. The box I have has no red jumper or battery just a cable from the power side to the mainboard. I undid this and left it for a few minutes then followed the instructions. In the downloads section there is a sammy 2110c guide that says the only way to set the netid is to reprogram a chip. Just thought I would share that with you

Stewie · 23-05-08, 01:27 PM

Hi, it was for a telepest pace Di1000t I was hoping to do with an atmega as I did not have a fun to hand. Oh well looks like I shall wait till I get home and try it with the fun. However will I be able to set the net id for a new telepest area from an ex C&W location, or will I have to pick up my fun and then go back to the telepest location to change and complete the net id?? Cheers

rickster1 · 27-05-08, 10:06 PM

can someone help please i have taken red jumper out to re set my pace box to fix net id but cant seem to get it showing 09999 i have made a fun card up changed frequency

fitz · 29-05-08, 05:20 PM

Hi. Just noticed only seems to be netid fun hex v1.6 in the downloads section.

Try NetIDv2.1.7.2.rar which is based on the v1.7 hex and supports atmegas as well as funcards. Hopefully this will be added to the downloads section soon.

All credit to the original author(s), details in the readme.

Cheers, fitz.

Edit: the file can now be found in downloads > HEX-FUNCARDS-ETC thx to jimbo

jimbo · 29-05-08, 05:22 PM

ta fitz getting on to it now.

haz · 29-05-08, 10:38 PM

Hi can anyone help
i need to make an 'exteep file' using toxic
does anyone have the file for toxic they could pm me please
Or
i have the old 'exteep file' and have the new keys
? how do i create a new file from the latest keys
where do we put the new keys which i have got from big maq

thanks

KD1 · 30-05-08, 08:18 PM

I have the lastest net id 1.7 for both fun and atmega if anyone needs it pm me ... Can u upload files onto this forum?? KD1

22-05-08, 05:36 PM	#31 (permalink)
ouzi1212 Senior Member Join Date: Mar 2008 Posts: 912 Thanks: 6 Thanked 188 Times in 184 Posts	Re: funcard netid tutorial not sure if it would work with atmega, try using libby method to change net id u dont need the card with this way.

22-05-08, 05:47 PM	#32 (permalink)
Stewie Member Join Date: Dec 2007 Posts: 63 Thanks: 0 Thanked 1 Time in 1 Post	Re: funcard netid tutorial Hi, what tools do I need for libby? I only have my laptop with me?

22-05-08, 05:50 PM	#33 (permalink)
ouzi1212 Senior Member Join Date: Mar 2008 Posts: 912 Thanks: 6 Thanked 188 Times in 184 Posts	Re: funcard netid tutorial libby is a softwere which is in downloads, u will need ur box to be connected with a rs232 connector, then u can change the net id and more, u dont need to use the card.

23-05-08, 03:09 AM	#34 (permalink)
jontydog Super Moderator Join Date: Feb 2006 Posts: 1,225 Thanks: 0 Thanked 5 Times in 5 Posts	Re: funcard netid tutorial Just a quick note on setting netid on sammy 2110C I have just done it this way with just the card. The box I have has no red jumper or battery just a cable from the power side to the mainboard. I undid this and left it for a few minutes then followed the instructions. In the downloads section there is a sammy 2110c guide that says the only way to set the netid is to reprogram a chip. Just thought I would share that with you __________________ TM 1000D Super. SS2 PCI. Echosmart Dsb 791 1M Dish. Edon 2120 Positioner. 80cm Mesh Dish Motorised. 28E to 30W

23-05-08, 01:27 PM	#35 (permalink)
Stewie Member Join Date: Dec 2007 Posts: 63 Thanks: 0 Thanked 1 Time in 1 Post	Re: funcard netid tutorial Hi, it was for a telepest pace Di1000t I was hoping to do with an atmega as I did not have a fun to hand. Oh well looks like I shall wait till I get home and try it with the fun. However will I be able to set the net id for a new telepest area from an ex C&W location, or will I have to pick up my fun and then go back to the telepest location to change and complete the net id?? Cheers


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

27-05-08, 10:06 PM	#36 (permalink)
rickster1 Junior Member Join Date: May 2008 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Re: funcard netid tutorial can someone help please i have taken red jumper out to re set my pace box to fix net id but cant seem to get it showing 09999 i have made a fun card up changed frequency

29-05-08, 05:20 PM	#37 (permalink)
fitz VM, going to play a game Join Date: May 2008 Location: Behind You Posts: 65 Thanks: 2 Thanked 14 Times in 14 Posts	Re: funcard netid tutorial Hi. Just noticed only seems to be netid fun hex v1.6 in the downloads section. Try NetIDv2.1.7.2.rar which is based on the v1.7 hex and supports atmegas as well as funcards. Hopefully this will be added to the downloads section soon. All credit to the original author(s), details in the readme. Cheers, fitz. Edit: the file can now be found in downloads > HEX-FUNCARDS-ETC thx to jimbo Last edited by fitz; 30-05-08 at 08:32 PM.

29-05-08, 05:22 PM	#38 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 1,481 Thanks: 18 Thanked 166 Times in 117 Posts	Re: funcard netid tutorial ta fitz getting on to it now. __________________ only a fool pays sat subs lol

29-05-08, 10:38 PM	#39 (permalink)
haz Junior Member Join Date: May 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Re: funcard netid tutorial Hi can anyone help i need to make an 'exteep file' using toxic does anyone have the file for toxic they could pm me please Or i have the old 'exteep file' and have the new keys ? how do i create a new file from the latest keys where do we put the new keys which i have got from big maq thanks Last edited by haz; 29-05-08 at 10:42 PM.

30-05-08, 08:18 PM	#40 (permalink)
KD1 Junior Member Join Date: May 2008 Posts: 29 Thanks: 0 Thanked 0 Times in 0 Posts	Re: funcard netid tutorial I have the lastest net id 1.7 for both fun and atmega if anyone needs it pm me ... Can u upload files onto this forum?? KD1

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem programming Funcard to Samsung 2100c	paul001	Cable TV Chat	9	21-11-08 11:46 PM
Funcard Tutorial	Tee_111	Cable TV Chat	290	09-11-08 10:36 AM
programming funcard	jt5	Cable TV Chat	30	24-04-08 01:14 PM
MOSC Tutorial	Tbone	Cable TV Chat	16	21-06-07 10:43 AM
New AU funcard files	ehsan	Cable TV Chat	24	19-06-07 12:07 AM