funcard netid tutorial

[PaddyBhoy]

i've read this tutorial a few times but after i set the id 09999 put the card it, it reboots and comes back with a number that is not my netid. it starts with 65 or something like that


i have this sorted now, i messed up the internal file

[viamphie]

hi guys ive tried this tuton a 4001 but after i insert the card the box reboots and goes straight to tune..... its not a standard tune fault cos my net id is 5 stars (*****) instead of 00018 and it only happened after i unplugged it. another of my boxes a 4010 is working ok

[easyas123abc]

You may need to re set the red jumper, if the tut never worked.

It only works with funcard from wat i no.

[scott27]

can anyone know how i can get the ird numbers ta juniormember

[scott27]

how can i get ird&bk no,s

[viamphie]

ird is usualy on your scart lead plug inside the box... you can also look for a program called BKE ( bok key extractor) or toxic 7 and load the image from your card using a card reader

[bmarra]

hi does the fun netid work with ditv 4000 i need to pull the redjumper as it wont let me in the diag/engineer menu am i right in thinking its hold up and down on the box when powering up to get into the diag/engineer menu, thanks

[ouzi1212]

the funcard netid should work only if the box is in the correct area DI 4000n - will work in ex cw and DI 4000t - for tw area

[ulfbaz]

hi im trying to change the net id on my sammy 2100 i have reset it to 09999 but im unsure when programing the card of what goes into the flash hex can anyone help
thanx ulfbaz

[ouzi1212]

check in downloads u will find the NetIDv2, u can get the flash from there also there are two flash 1 for funcard and other for atmega card, when programme make sure to write the inteep two times.