New User - EUROVOX MAX V - Help Needed

[biggeorgeforeman]

Just got this delivered today and after 1st set-up I'm only getting 71 channels from 11 Transponders.
All new to this so not sure what to try now, I been through both codes that were on the sheet provided and still only get limited channels.
By the way its Leeds, V....M....

Current software claimed to be the latest: June 28 2007

Anyone offer any help on how I can get some more channels, Wifes missing her favourite pet channel.

Have a live feed in and no splitter although I do have broadband too, 2 leads coming from the wall, 1 to my modem and 1 to the tv box, now my Eurovox v.

Will it make any difference if i remove my modem lead while scanning for channels/transponders.

TIA

Regards

George

[Bandit1.3]

Hi try this go into installation press power scan change it from normal to full press ok if this does not work. Go into config and clear all data this will erase all downloaded channels for a clean install then repeat above. good luck

[biggeorgeforeman]

Cheers Bandit, Been trying this all morning now and no matter what I only get the 71 or sometimes 73 channels.

Currently scanning now on the 6887 as someone in the forum has said it fixed theres, As yet its to find a transponder and at 500/770 now.

Have also scanned in the other 6952 but thats the 71 to 73 channels and 11 transponders, Surely I can receive more channels.

George

[biggeorgeforeman]

Hi Guys, Finally got it working, Reset factory defaults and did a new scan and finally found 36 transponders and 246 channels

What a nice piece of kit, Well chuffed

George

[telecom69]

Good for you well done, if at first you dont succeed and all that good of you to post how you did it as it will help others in the same situation ....

[Kop Magic]

As a matter of interest does anyone know what the maximum amount of transponders for Ireland is? I have 13 Transponders and 141 Channels.