Sam 2100c update problem - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

adjbeatbox · 13-09-07, 11:08 AM

I have j-tagged the box (2100c), got the IRD and BK, put it all into netid v2, and saved all of the appropriate files. I then programmed my funcard 2, and when I put the card into the box, once in the engineers menu, it switches off then starts to upd8( Hope this is all rite so far!!).BUT The box is now sitting alternating between ld20 and ld:30, with the ntl home logo on the T.V screen... I have tried both bke2.2 and netid to save the files and program the card but, im getting the same results?

Any ideas on whats going on guys?

steve07951 · 13-09-07, 11:10 AM

rewrite the inteep
when you write the flash it corrupts the inteep so after you write the flash rewrite the inteep
this should do it if post back
steve

adjbeatbox · 13-09-07, 02:04 PM

Please can someone tell me where i have gone wrong ... After programming card Im getting LD20 the LD30 continuosly but no cahnnels. I have left it for over 1hr now..
plz help

adjbeatbox · 13-09-07, 02:16 PM

I have tied re programming the internal eeprom, but still getting same error....
box will go into restart mode when the programmed card is inserted, but it wont shift past ld20 and ld30... Can any1 plz help?

adjbeatbox · 13-09-07, 04:15 PM

I've re programmed the card and still getting the ld20 -ld30 on the display...
everything seems rite except for when the card goes in, doesnt it usually start 2 autoupdate, when u insert it into the box on the eng. menu?
~The box re-starts, but it stays on the ld20-30 on the front display...
can anyone shed some light on this matter.
I have tried everything I can think of, but im getting no results... plz help!!!

adjbeatbox · 13-09-07, 07:44 PM

Please Help

--No joy... Box Stuck on ld20&ld30 after new prog. fcard has been installed!!!
Losing my mind here! Checked the forums all day 2day and yesterday and Im still non the wiser.. Have tried re-writing the inteep file after all the others AGAIN but no joy.

Im using bke2.2 to get all the files.. The pogo Jtagger worked a treat with the new bytes inputed from the forum, so th bk and th ird are spot on... But no joy..Does a funcard 2 do the job ok with the 2100's?

rizzla664 · 13-09-07, 08:59 PM

try booting the box without the card. but i think u have programmed the card wrong the inteep is your bk and ird right?? that needs to be converted to hex with swapbinhex and programmed into the EXTEEP.
you get me??

reddiesel · 14-09-07, 01:20 AM

Quote:

Originally Posted by adjbeatbox

Please Help

--No joy... Box Stuck on ld20&ld30 after new prog. fcard has been installed!!!
Losing my mind here! Checked the forums all day 2day and yesterday and Im still non the wiser.. Have tried re-writing the inteep file after all the others AGAIN but no joy.

Im using bke2.2 to get all the files.. The pogo Jtagger worked a treat with the new bytes inputed from the forum, so th bk and th ird are spot on... But no joy..Does a funcard 2 do the job ok with the 2100's?

You need a funcard 4 or higher. Does your programmer say its written ok ?

5av1dg312 · 14-09-07, 10:56 AM

im thinking have you got the right net id for the area your in? did you use the right one when doing it with netid v2?

13-09-07, 11:08 AM	#1 (permalink)
adjbeatbox Multimedia Menace Join Date: Aug 2007 Location: Renfrewshire..... Scotland Posts: 65 Thanks: 6 Thanked 2 Times in 1 Post	Sam 2100c update problem I have j-tagged the box (2100c), got the IRD and BK, put it all into netid v2, and saved all of the appropriate files. I then programmed my funcard 2, and when I put the card into the box, once in the engineers menu, it switches off then starts to upd8( Hope this is all rite so far!!).BUT The box is now sitting alternating between ld20 and ld:30, with the ntl home logo on the T.V screen... I have tried both bke2.2 and netid to save the files and program the card but, im getting the same results? Any ideas on whats going on guys?

13-09-07, 11:10 AM	#2 (permalink)
steve07951 (super Mod) Join Date: Sep 2006 Location: around somewhere Posts: 2,376 Thanks: 0 Thanked 28 Times in 16 Posts	Re: Sam 2100c update problem rewrite the inteep when you write the flash it corrupts the inteep so after you write the flash rewrite the inteep this should do it if post back steve

13-09-07, 02:04 PM	#3 (permalink)
adjbeatbox Multimedia Menace Join Date: Aug 2007 Location: Renfrewshire..... Scotland Posts: 65 Thanks: 6 Thanked 2 Times in 1 Post	Re: Sam 2100c update problem Please can someone tell me where i have gone wrong ... After programming card Im getting LD20 the LD30 continuosly but no cahnnels. I have left it for over 1hr now.. plz help

13-09-07, 02:16 PM	#4 (permalink)
adjbeatbox Multimedia Menace Join Date: Aug 2007 Location: Renfrewshire..... Scotland Posts: 65 Thanks: 6 Thanked 2 Times in 1 Post	Re: Sam 2100c update problem I have tied re programming the internal eeprom, but still getting same error.... box will go into restart mode when the programmed card is inserted, but it wont shift past ld20 and ld30... Can any1 plz help?

13-09-07, 04:15 PM	#5 (permalink)
adjbeatbox Multimedia Menace Join Date: Aug 2007 Location: Renfrewshire..... Scotland Posts: 65 Thanks: 6 Thanked 2 Times in 1 Post	Re: Sam 2100c update problem I've re programmed the card and still getting the ld20 -ld30 on the display... everything seems rite except for when the card goes in, doesnt it usually start 2 autoupdate, when u insert it into the box on the eng. menu? ~The box re-starts, but it stays on the ld20-30 on the front display... can anyone shed some light on this matter. I have tried everything I can think of, but im getting no results... plz help!!!


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

13-09-07, 07:44 PM	#6 (permalink)
adjbeatbox Multimedia Menace Join Date: Aug 2007 Location: Renfrewshire..... Scotland Posts: 65 Thanks: 6 Thanked 2 Times in 1 Post	Sam 2100c update problem..HELP PLZ Please Help--No joy... Box Stuck on ld20&ld30 after new prog. fcard has been installed!!! Losing my mind here! Checked the forums all day 2day and yesterday and Im still non the wiser.. Have tried re-writing the inteep file after all the others AGAIN but no joy. Im using bke2.2 to get all the files.. The pogo Jtagger worked a treat with the new bytes inputed from the forum, so th bk and th ird are spot on... But no joy..Does a funcard 2 do the job ok with the 2100's?

13-09-07, 08:59 PM	#7 (permalink)
rizzla664 Senior Member Join Date: Jun 2007 Location: west yorkshire Posts: 163 Thanks: 2 Thanked 1 Time in 1 Post	Re: Sam 2100c update problem..HELP PLZ try booting the box without the card. but i think u have programmed the card wrong the inteep is your bk and ird right?? that needs to be converted to hex with swapbinhex and programmed into the EXTEEP. you get me?? Last edited by rizzla664; 13-09-07 at 09:01 PM.

14-09-07, 10:56 AM	#9 (permalink)
5av1dg312 Clueless Cable Moderator Join Date: Apr 2007 Location: Nottingham Posts: 1,383 Thanks: 10 Thanked 18 Times in 14 Posts	Re: Sam 2100c update problem im thinking have you got the right net id for the area your in? did you use the right one when doing it with netid v2? __________________ *5av1dg312* *Clueless Cable Moderator* Click HERE to Donate to Techwatch

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem programming Funcard to Samsung 2100c	paul001	Cable TV Chat	8	09-07-08 09:05 AM
belkin wireless network problem	pollitt	Wireless	6	12-04-08 03:47 PM
Networking problem	lincsat	PC Hardware	23	09-08-07 06:56 PM
Reverse No Update Mod on 4000	5av1dg312	Cable TV Chat	3	26-06-07 03:28 AM
Major Laptop Problem	khamill	Laptops	7	09-05-07 05:50 PM