unlooper help please??

[pedsrock100]

Hi i have this ubomb+ unlooper (modded) and i dont have a clue as how to use it. Can any one please tell me how to install it and also what dip settings should be at? Theres not a user guide on how 2 set this thing up anywhere!!It to unlock a rom11 b0d. any help would be appreciated.

[reddiesel]

I think their much the same way as the t911, read The Help me Rom11 rev boc unlocked thread, Lovelessguy.

[pedsrock100]

Hi i only have 4 dip switches on the ubomb+ i can flash it but when i run the script it cant reset atr, i can read the card in nagra edit though?

[jimbo]

if its flashed with software have dip 2 set to on 1,3&4 off, open win explorer 5.1 i think load a script and run.

[pedsrock100]

Ok this is what i have done so far.

unlooper came blank with no software loaded.
flashed with new11x
red and green led ON!!
set dip 2 to on 1-3-4 off
ran unlocking script
Errors:
Script Error on Line 524
Sc.GetByte: Requested Byte Exceeds Last Read Request

there is no green led when this script runs
I dont know if what i have done is correct im a Virg*n to this unlooping thing!!

Software what software? does that mean like WinExlorer?

Dont mean to be a pest but i really could do with a walkthrough
from when the unlooper arrives totally blank? to get it up and running.
PRETTY PLEASE??

[reddiesel]

Is there a pot to adjust on the ubomb, i think youve got the right idea, i use a t911 with the mike data script, it says it also works on the ubomb, you could try that, in winex 5.4. You could try flashing with newd 12 or 13 , i have 11 on mine still. Its best to practice on a card that you already have the details as you could balls it up and have to use mrom and lose your bk.
There are tuts and files in downloads.

[jimbo]

he may have ball`s the card up already

[pedsrock100]

If i have then please tell me the reason? i do have 2 other spare cards to muck about with. I can read the cards using NagraEdit and they have valid ATR______BUT when i use the unlooper the card seems invisible to it!!! nuthin!!! If its going to be all this hastle i think i'll jst get a funcard and scrap the unlooper.


JUST 1 QUESTION:: SHOULD THE JABS UBOMB+ (PENGA PRE-MODDED) BE FLASHED WITH XP ATMEL BEFORE I RUN WINEXPLORER SCRIPT?

[reddiesel]

Have you got it connected to rs232 com port on pc and is your pc set for plug and play device, you can check in device manager, click on com + lpt device, and then on com 1 port.
I would flash it with NEWD11 .

[pedsrock100]

yep my programmer works on same port and using same serial cable.


When i flash unlooper with Newd11x only the red light is active however when i flash with mm3 then both green @ red leds are active whats going on here, i thought the green led came on when flashed with Newd11x


Hi this has been edited just wanna say there must be more than 2 people who have unlooped rom11 cards, can sum1 please show me what settings the jabs ubomb unlooper should be firstly to flash then to unloop?