Technomate 1000 Series info and tips

To Add New Transponder
Press Menu on remote control
Select Installation and press OK
Select Advanced Search press OK
To add new TP press Green button on remote
Select Transponder
Type in new TP Frequency
Select Symbol Rate type in new symbol rate
Select Polarization using right hand arrow key select V or H
Now press Red button to scan for channels on that TP
***************************************
To Delete a Transponder
Select Menu
Select Installation
Select Advanced Search
Go to Transponder
Select the TP that you wish to delete by using the l/R hand arrow keys
Press Yellow button on remote to delete selected Transponder
************************************************** *
To Move Channels
Menu>>
Select Edit Channels press OK
Select Move Channels press OK
Select the channel you wish to move to new position by pressing OK
Now type in new channel number you want for that channel then press OK when in new position
Or using the left or right hand arrow keys move that channel to new new channel number then press OK. Press Exit then Yes to store in new position
***********************
To Delete Channels
Menu>>
Select Edit Channels press OK
Select Delete Channels press OK
Select the channel.s you wish to delete press OK on that channel
You can select as many channels you wish to delete by pressing OK on the channels
you wish to delete
Press Exit then Yes if you wish to delete the channels
************************************************** ***********
To Change Channel Name
Menu>>
Select Edit Channels press OK
Then Rename CH/Edit Pids press OK
Select Edit Name press OK
now type in the new name using up/down L/R arrow keys to select the letters
when completed press Exit then Yes to store the new name
*******************************************
To Store Satellites
Menu>>
Installation press OK
Select Satellite Set Up
Select Satellite then using L/R hand keys select the satellite that you want to store
then press Yellow button then press Exit
Select Motorized Settings press OK
Then select DisEQc Motor
Select Transponder and select an active TP
then select 1.2 diseqc or usals using the right arrow key to move dish
Using the 1.2 Diseqc
Select Move by using the left or right arrow key to move dish to get strongest signal
Now go to Save press OK
Press Red button to scan for channels on that satellite
************************************************** *******
Most tm1000 series remotes now have type 2 [round at the bottom] , the older type 1 is more of a square shape.
Menu>System>setting>password>enter pin 0000>select remote type from bottom of list>exit and save.
************************************************** *******
To enter Biss keys on the 1000series...
Go to channel in question, press [8280] on remote, this will bring up the Biss menu, [ignore the [off ] as it is on] find an empty line with all 0's or any line, then enter keys> exit and save the new keys
********************************************