How to programme a dragon cam - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Analoguesat · 12-02-06, 10:38 PM

You will need either a dragon loader card, or a Fun7 card, plus a card programmer.

Download the latest predator file from your favourite download site. Unzip it and make sure you know where its gone!

To programme the dragon loader card get a copy of dragon loader from

_http://www.dragonmodul.com/

You will need:
Smartmouse compatible card programmer (something like an infinity or dynamite programmer)
The dragonload.exe program

-Connect the card programmer to com1 or com2, make sure the programmer is in 6 MHz mode
-Run "dragonload.exe"
-By pressing the "Settings" button, you can change from com1 to com2 depending which com port your programmer is attached
-Press "Connect"

If you have a Dragon Loader card:
Select sragon loader card in the drop down menu
In the file open dialog that appears, select the firmware you want to load (.dra file).
Load the .dra file
The card will now be loaded. (This will take a 3-5 minutes).

If you have a fun7 card:
Programme the flash with FUN7LDR.HEX
Progarmme the external eeproms with the predator bin file. If you are using infinity software select option 2 "reverse spanning" to split the file when asked. (Your programmer software needs to be able to split the bin file across two eeproms)

To change the firmware on the dragon, put the receiver onto a fta channel. Insert the loader card. Turn the receiver off. Turn it on, and navigate to
the common interface menu on your receiver.
Select the "Dragon Loader" module.
In the next menu, select "yes, Load module".
Now a menu appears indicating that loading is in progress. To see the actual percentage you will need to press "refresh" as there isnt any auto update.

Loading will take about 5-10 minutes, so dont be in any hurry to do it!

Remove card, and switch the receiver off then on again. Your dragon should now display the new version of predator.

Dont try what I did the first time, and try to do both sets of instructions on one card.....or you will get totally confused. Follow the top one if you have a Dragon Loader card.

edited to reword better

BGonaSTICK · 13-02-06, 01:11 AM

Hey, nice post AS

Analoguesat · 12-03-06, 11:56 PM

Predator version 3.31 available from _http://www.dragonmodul.com/

New for this version is the Polsat package.

Analoguesat · 25-05-06, 04:42 PM

Latest version of Predator is 3.43, and includes Premiere on 19E.

12-02-06, 10:38 PM	#1 (permalink)
Analoguesat manic midlander retired mod Join Date: Jan 2006 Location: Scottish Borders Posts: 11,668 Thanks: 21 Thanked 1,334 Times in 985 Posts	How to programme a dragon cam You will need either a dragon loader card, or a Fun7 card, plus a card programmer. Download the latest predator file from your favourite download site. Unzip it and make sure you know where its gone! To programme the dragon loader card get a copy of dragon loader from _http://www.dragonmodul.com/ You will need: Smartmouse compatible card programmer (something like an infinity or dynamite programmer) The dragonload.exe program -Connect the card programmer to com1 or com2, make sure the programmer is in 6 MHz mode -Run "dragonload.exe" -By pressing the "Settings" button, you can change from com1 to com2 depending which com port your programmer is attached -Press "Connect" If you have a Dragon Loader card: Select sragon loader card in the drop down menu In the file open dialog that appears, select the firmware you want to load (.dra file). Load the .dra file The card will now be loaded. (This will take a 3-5 minutes). If you have a fun7 card: Programme the flash with FUN7LDR.HEX Progarmme the external eeproms with the predator bin file. If you are using infinity software select option 2 "reverse spanning" to split the file when asked. (Your programmer software needs to be able to split the bin file across two eeproms) To change the firmware on the dragon, put the receiver onto a fta channel. Insert the loader card. Turn the receiver off. Turn it on, and navigate to the common interface menu on your receiver. Select the "Dragon Loader" module. In the next menu, select "yes, Load module". Now a menu appears indicating that loading is in progress. To see the actual percentage you will need to press "refresh" as there isnt any auto update. Loading will take about 5-10 minutes, so dont be in any hurry to do it! Remove card, and switch the receiver off then on again. Your dragon should now display the new version of predator. Dont try what I did the first time, and try to do both sets of instructions on one card.....or you will get totally confused. Follow the top one if you have a Dragon Loader card. edited to reword better __________________ Basic forum rules for both satellite & cable: no keys no patches no offering or asking for card shares Anyone pm'ing me for details of card sharing or anything to do with hacking cable will be banned immediately Analogue forever!!

13-02-06, 01:11 AM	#2 (permalink)
BGonaSTICK Dodgy Geezer Join Date: Nov 2005 Location: Brighton Posts: 9,718 Thanks: 3 Thanked 163 Times in 57 Posts	Re: How to programme a dragon cam Hey, nice post AS __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

12-03-06, 11:56 PM	#3 (permalink)
Analoguesat manic midlander retired mod Join Date: Jan 2006 Location: Scottish Borders Posts: 11,668 Thanks: 21 Thanked 1,334 Times in 985 Posts	Re: How to programme a dragon cam Predator version 3.31 available from _http://www.dragonmodul.com/ New for this version is the Polsat package. __________________ Basic forum rules for both satellite & cable: no keys no patches no offering or asking for card shares Anyone pm'ing me for details of card sharing or anything to do with hacking cable will be banned immediately Analogue forever!!

25-05-06, 04:42 PM	#4 (permalink)
Analoguesat manic midlander retired mod Join Date: Jan 2006 Location: Scottish Borders Posts: 11,668 Thanks: 21 Thanked 1,334 Times in 985 Posts	Re: How to programme a dragon cam Latest version of Predator is 3.43, and includes Premiere on 19E. __________________ Basic forum rules for both satellite & cable: no keys no patches no offering or asking for card shares Anyone pm'ing me for details of card sharing or anything to do with hacking cable will be banned immediately Analogue forever!!