How to install a DiSEqC motor the right way - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

BGonaSTICK · 13-03-06, 01:25 AM

Well, it's taken me dozens of hours to get this the way I wanted it.

Here is the draft version. The next version will have some useful diagrams included too, but I've gone dizzy having read this so many times and I just wanted to get it out there.

Please post comments and suggestions on the forums.

If anybody wants to use this for an install in the near future, I'd be glad to hear how it went and what you think.

Thanks,

STICK

chavslav · 13-03-06, 09:18 PM

well written, and easy to follow will be using this on sunday !!

as its fit motor day....

trinimike · 10-02-07, 03:15 PM

Hi BGonaSTICK,

Just purchased a Technomate 1500 with a 90cm dish and a Diseqc motor. Thannkyou for your ebook very helpful, can you advise when the completed version is available. You can email me at [Hidden] at any time.

again thankU for an excellent guide.

Mike.

Quote:

Originally Posted by BGonaSTICK

Well, it's taken me dozens of hours to get this the way I wanted it.

Here is the draft version. The next version will have some useful diagrams included too, but I've gone dizzy having read this so many times and I just wanted to get it out there.

Please post comments and suggestions on the forums.

If anybody wants to use this for an install in the near future, I'd be glad to hear how it went and what you think.

Thanks,

STICK

BGonaSTICK · 10-02-07, 10:18 PM

Hi Mike.

I removed your email address from the open forum to save you getting spammed

We have no plans to update the guide at this time, as we have not found any amendments to make. I suppose it could really be re-issued as V1.0, but I don't really see a need.

I would like to add some more pictures to it, but don't have any to hand just yet. Next time I'm up the ladder, I might remedy that

Anyhow, there have not been any errors notified to us, so you can go right ahead and use it with confidence.

Regards,

STICK

nanochickin · 26-03-07, 10:19 PM

Quote:

Anyhow, there have not been any errors notified to us, so you can go right ahead and use it with confidence.

I'll let you know tomorrow Stick

Got the T & K brackets up so its just a case of dismantling my Christams tree dish setup to get the 90cm one ready for the motor install

BGonaSTICK · 27-03-07, 09:59 AM

Go for it!

13-03-06, 09:18 PM	#2 (permalink)
chavslav Senior Member Join Date: Feb 2006 Posts: 338 Thanks: 0 Thanked 2 Times in 2 Posts	Re: How to install a DiSEqC motor the right way well written, and easy to follow will be using this on sunday !! as its fit motor day....

10-02-07, 10:18 PM	#4 (permalink)
BGonaSTICK Dodgy Geezer Join Date: Nov 2005 Location: Brighton Posts: 10,629 Thanks: 3 Thanked 99 Times in 44 Posts	Re: How to install a DiSEqC motor the right way Hi Mike. I removed your email address from the open forum to save you getting spammed We have no plans to update the guide at this time, as we have not found any amendments to make. I suppose it could really be re-issued as V1.0, but I don't really see a need. I would like to add some more pictures to it, but don't have any to hand just yet. Next time I'm up the ladder, I might remedy that Anyhow, there have not been any errors notified to us, so you can go right ahead and use it with confidence. Regards, STICK __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

27-03-07, 09:59 AM	#6 (permalink)
BGonaSTICK Dodgy Geezer Join Date: Nov 2005 Location: Brighton Posts: 10,629 Thanks: 3 Thanked 99 Times in 44 Posts	Re: How to install a DiSEqC motor the right way Go for it! __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|