|
Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers
|
|
|
|
||||||
| Register | Members List | Search | Search | Today's Posts | Mark Forums Read |
| Technomate Support for the best value STB's around |
![]() |
|
|
Thread Tools |
|
|
#1 (permalink) |
|
Junior Member
Join Date: Jul 2006
Posts: 26
Thanks: 1
Thanked 0 Times in 0 Posts
|
Ok
I'm very new at this, Ive done a bit of research but its not an easy subject to get started on. Everything Ive read seems to assume a certain level of knowledge which I dont have. Anyhow Ive read between the lines and think I know what I need to do. I have a couple of questions though. First I should say that I wont have a null modem cable till tomorrow so I cant do anything yet. Ive downloaded the Darkman patch for my TECHNOMATE TM 1500 CI+ The patch seems to come with a programme to update keys constantly via broadband - is this necessary for everything that I can get access to or just some of it? Should I update my receiver with the Technomate update before I load the Darkman patch? If I do a factory reset will this remove patch i.e. If I really screw everything up can I get back to where I started? ![]() Thanks for any help and sorry for my naivety Neil |
|
|
|
|
|
#2 (permalink) |
|
Super Murderator
Join Date: Nov 2005
Location: Brighton
Posts: 10,633
Thanks: 3
Thanked 64 Times in 37 Posts
|
Hi Neil.
Some of the instructions can look a bit scary, but after you've done it a couple of times it's fine. It's just getting to that point that's hard! The Darkman patch will completely overwrite the firmware in the receiver, so no, a factory reset won't do much in that respect. The 'patched' version is based on the Techno firmware, but adds certain functionality. The basic firmware is 'incorporated' into the patched version, so a factory reset may still default the basic receiver options and settings. Don't have one, so I don't know for sure. Once you load the patch though, you can't expect everything to be exactly as it was. The patchers will probably have had to make room for the extra code, but I don't know how they've done that. To be honest m8, there is very little open at the moment, so initially you will probably be a little disappointed. The broadband thing with the Technos is to open TPS, which is a very good package on 13E. It grabs new keys off the Internet every 30 minutes (when they change). This kind of online update is very susceptible to disruption by the provider (they can shut the offending sites down pretty quickly, and do...) so I'm not sure how slick it will be. Similar solutions for the Dreambox and the PCI cards are pretty pants. So, to recap - no need to apply Techno firmware update first, not sure about factory reset, but certainly won't rollback Darkman patch to original firmware, and broadband software only adds TPS, but not much else open. If you get the flash wrong, your box could be scrap. Don't panic, be bold, but be sure you have the right patch, read all the instructions twice before starting, and don't turn off the power mid-flash! Good luck, STICK
__________________
Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W |
|
|
|
|
|
#3 (permalink) |
|
Junior Member
Join Date: Jul 2006
Posts: 26
Thanks: 1
Thanked 0 Times in 0 Posts
|
Many thanks for the reply.
Not sure whether I will or wont now, I'll have to have a think.On a seperate note Ive scanned my manual (I have a habit of losing them!) Would it be of any use? Also do you know of an arabic news channel that broadcasts in English? Im interested in seeing how things are being reported in the middle east. Thanks again Ill email the manual if you want it. Cheers Neil |
|
|
|
|
|
#4 (permalink) |
|
Senior Member
Join Date: May 2006
Posts: 1,678
Thanks: 0
Thanked 1 Time in 1 Post
|
hi Neil,i would not bother with a patch,the support is sh*t for tms
.any receiver is only as good as the support you get.by the way darkman is a **** i could tell you some things on him.sid |
|
|
|
|
|
#5 (permalink) |
|
Super Murderator
Join Date: Nov 2005
Location: Brighton
Posts: 10,633
Thanks: 3
Thanked 64 Times in 37 Posts
|
Yes please to the manual scan.
If it's not too large, perhaps you could upload it in a new thread in the Techno section? Split it over more than post if you need to. There is a 2Mb limit on upload size (each object/post). If it's fiddly, mail it to admin'at'satellitehelp.co.uk and I'll cut it up and post it. Cheers. There are a few channels open, but you'll probably have enough fun with FTA for now. Personally, I'd wait until a good package opens up and then patch it. Some Cryptoworks channels are open. Have a read here to see what. Not sure on the Arabic channel in English. Anyone know of one?
__________________
Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W |
|
|
|
|
|
#6 (permalink) |
|
Junior Member
Join Date: Jul 2006
Posts: 26
Thanks: 1
Thanked 0 Times in 0 Posts
|
Manual sent by email
Sorry about the big file sizes, I saved them as giffs originally but the quality was cr*p. Everything that says microsoft on it bites me ![]() Hope you can make something of it Cheers Neil |
|
|
|
|
|
#7 (permalink) |
|
Super Murderator
Join Date: Nov 2005
Location: Brighton
Posts: 10,633
Thanks: 3
Thanked 64 Times in 37 Posts
|
Cheers m8. I'll have a hack when it floats to the top of my list of things to do
![]()
__________________
Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W |
|
|
|
|
|
#8 (permalink) |
|
Senior Member
Join Date: May 2006
Posts: 1,678
Thanks: 0
Thanked 1 Time in 1 Post
|
hi also you can look here
![]() http://www.technomate.com/home.php you should see whats upto date for manual firmware & so on. sid |
|
|
|