Pauxis

[Daggasalmon]

Hi, Does anyone know about/own this receiver? Is it patchable? Kind Regards.

[BGonaSTICK]

Never heard of it

Goggle turns up very little.

Chances of a patch? Slim, to bu99er all.

[Mickha]

I've heard of Praxis receivers but not Pauxis. Can you please supply a model number.

[nanochickin]

If its a Praxis it sounds pretty old. Is it both analogue & Digital? :?

I found this article on this web page. http://www.drakesvision.com/digi6.htm

Praxis DigiMaster 9600 :- Yet another combined digital & analogue receiver from German-based company Praxis. On the analogue side, there's no true Panda Wegener decompression (which will have saved Praxis paying royalty fees to Panda for the facility). Nevertheless the analogue audio sounds ok. This box supports mechanical polarisers as well as the usual voltage-switched ones; unfortunately, only the analogue part of the receiver can be used for this. On the digital side there is a 1500 channel memory + a further 1400 radio channels can be stored. There isn't any manual PID insertion facility but both SCPC & MCPC reception is covered (symbol rates of 2-45 Megasymbols/second). At the back are 2 scart sockets + a separate S-Vhs socket & a serial port. There are 3 lnb sockets, 2 for analogue & 1 for digital. VBI teletext insertion is included as is DiSEqC 1.0. The mains power supply works from 90-260 volts. This receiver looks like a rebadged ProDX3300A/Vortec VS-9700/Strong SRT4200. The rear panels look identical, the specifications are similar or identical & the front panel looks very like the ProDX3300.

Praxis DigiMaster 9800AD+P :- Similar to the 9600 but this time there's a built in positioner and SCART sockets. Manual PID insertion is included & a "favourite channel" list can be set up for both analogue & digital stations. A version without the "P" suffix omits the positioner. Except for the front panel, this receiver seems the same as the Echostar AD-2000IP.

Hope this helps