programming x plus card

[tombo]

Hi,
Can anyone help me with programming my x plus card using a Cas 3 interface? I'm okay with the cam, Its just the card, I think you only get a couple of goes and I'm a bit nervous.
I would be very gratefull,
Many thanks,
Tom.

[BGonaSTICK]

Hi Tom, welcome to Satellite Help :welc3:

Programming cards is not my specialist subject, but maybe someone else will spot this and help you out.

I've moved it into the CAMs and cards section to make it easier to find.

[Analoguesat]

Are you trying to reactivate it?

If so m pretty sure you cant

[big d]

Originally Posted by tombo

Hi,
Can anyone help me with programming my x plus card using a Cas 3 interface? I'm okay with the cam, Its just the card, I think you only get a couple of goes and I'm a bit nervous.
I would be very gratefull,
Many thanks,
Tom.

************************************************** ******
i found this on a reputable site, i hope this helps.
*****************************************
when you get this card try it in your receiver.
If it opens the art/ al-j package all well and good.
If not then go in to your receiver cam menu/ slot see if it can tell you what encrytion it is? if you see viaccess, then you may have to turn on your viaccess within the cam/ receiver, if you see seca then the card has not been programmed yet.
You need to set up you programmer for 3.579 in phoenix mode using the right serial c@ble for your programmer.
run the installer program xone.exe found in the file section.
chose your comm port 1-4, click the connect button then the load code button.
If all's well you should see a number count in the bottom panel then complete.

[Analoguesat]

Thats for Al Jazeera Sports cards The OP was asking about a porn card which almost certainly cannot be reactivated or extended

[Analoguesat]

Not that it matteres now anyway - Xplus no longer exists as a channel!

Its now the free to air Eurotic Plus