Skystar 1 Signal problems - 4.2.2 (feeds) assistance. Help please - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

jascha · 23-11-06, 03:32 PM

Hi. I have a skystar 1 which works well, but on some transponders i do not get a signal at all.....whereas my stand alone tuner picks up the signal from the same transponder. Is there a problem with my card? I have tried different drivers but still the same.....if the signal is not 100% quality....i get nothing at all. Your help will be appreciated.

One other subject i want to ask is picking up 4.2.2 feeds....can i do so with my SS1 card? With ProgDVB is it possible? In software mode only? I cannot try as my dish is not pointing at Eutelsat yet.
If they are encrypted feeds....Mgeg2 -Encrypt is there a chance of watching these feeds?

Also which websites i can find out what feeds will be transmitted beforehand? I know of Satelliweb but was interested in more.....i am particularly interested in a concert broadcast on New Year's Day from Vienna and would like to find out beforehand all information regarding frequencies etcetc so i don't miss it.

Many thanks

Jimdefruit · 23-11-06, 04:06 PM

Hi jascha,
When Sid comes on line he is our feeds guru and may be able to help you. However, feeds dont get known until a few hours sometimes minutes before a broadcast.

Re your SS1, do you have the transponder lists correct for the channels you are trying to find on your SS1?

Check the transponder frequency on your standalone receiver and then do a transponder scan on your SS1. That may bring up the channels you are looking for.

BGonaSTICK · 23-11-06, 04:26 PM

Regarding the feeds, I've replied to your thread in the feeds section.

As for 4:2:2, yes it can be achieved on your Skystar1, certainly in software mode. I take it by your reference to software mode that you have a 'proper' Skystar1 with onboard hardware decoding?

I'm not sure if it will do 4:2:2 in hardware mode, but I would be very surprised if it didn't.

ProgDVB is a very capable piece of software, and will handle 4:2:2 OK.

satsid · 23-11-06, 04:28 PM

Quote:

Originally Posted by jascha

Hi. I have a skystar 1 which works well, but on some transponders i do not get a signal at all.....whereas my stand alone tuner picks up the signal from the same transponder. Is there a problem with my card? I have tried different drivers but still the same.....if the signal is not 100% quality....i get nothing at all. Your help will be appreciated.

One other subject i want to ask is picking up 4.2.2 feeds....can i do so with my SS1 card? With ProgDVB is it possible? In software mode only? I cannot try as my dish is not pointing at Eutelsat yet.
If they are encrypted feeds....Mgeg2 -Encrypt is there a chance of watching these feeds?

Also which websites i can find out what feeds will be transmitted beforehand? I know of Satelliweb but was interested in more.....i am particularly interested in a concert broadcast on New Year's Day from Vienna and would like to find out beforehand all information regarding frequencies etcetc so i don't miss it.

Many thanks

hi jascha.i have a ss2 card for my 4.2.2 with prog dvb this works fine for 4.2.2.the ss1 card is a bit different so im told,on this card i can not help.but with a ss2 look to see that elecard is ticked & on or you wont see 4.2.2..now older pc that are not as quick or old graffics cards will not be great with these cards.like all things newer is better as its more upto date.for mpeg 2 a speed of @ least 1500 for pc will be needed for a good pic,maybe a bit less if your lucky.dish size will also help as it will send more signel to the card.(ie bigger is best)now we are comming into the HD time for feeds,here you will need @ least a pc that will go 3400 for speed min 2 watch HD feeds.im told on HD feeds with a pc that runs say at 3400 for speed,you will need 2 turn off other things that are running on your pc,or your pic will suffer.this also will need a top graffics card as well 2 handel mpeg4.this should give you a guide on whats needed & put you on the right lines.
all the best.
from.
sid

satsid · 23-11-06, 04:37 PM

hi jascha a quick ps here.it will be best when scanning with your ss1 card to scan 7 east

your find all ebu feeds that are in 4.2.2 more than other sats

sid

dardruba · 02-12-06, 11:43 PM

Hi to Jascha
Just as an aside re the New Year's Day Concert, what do you hope to gain from satellite that the BBC doesnt provide on terrestrialTV?

23-11-06, 03:32 PM	#1 (permalink)
jascha Junior Member Join Date: Nov 2006 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	Skystar 1 Signal problems - 4.2.2 (feeds) assistance. Help please Hi. I have a skystar 1 which works well, but on some transponders i do not get a signal at all.....whereas my stand alone tuner picks up the signal from the same transponder. Is there a problem with my card? I have tried different drivers but still the same.....if the signal is not 100% quality....i get nothing at all. Your help will be appreciated. One other subject i want to ask is picking up 4.2.2 feeds....can i do so with my SS1 card? With ProgDVB is it possible? In software mode only? I cannot try as my dish is not pointing at Eutelsat yet. If they are encrypted feeds....Mgeg2 -Encrypt is there a chance of watching these feeds? Also which websites i can find out what feeds will be transmitted beforehand? I know of Satelliweb but was interested in more.....i am particularly interested in a concert broadcast on New Year's Day from Vienna and would like to find out beforehand all information regarding frequencies etcetc so i don't miss it. Many thanks

23-11-06, 04:06 PM	#2 (permalink)
Jimdefruit Super Moderator Join Date: Jan 2006 Posts: 2,858 Thanks: 20 Thanked 221 Times in 187 Posts	Re: Skystar 1 Signal problems - 4.2.2 (feeds) assistance. Help please Hi jascha, When Sid comes on line he is our feeds guru and may be able to help you. However, feeds dont get known until a few hours sometimes minutes before a broadcast. Re your SS1, do you have the transponder lists correct for the channels you are trying to find on your SS1? Check the transponder frequency on your standalone receiver and then do a transponder scan on your SS1. That may bring up the channels you are looking for. __________________ Dreambox 800 HD; Dreambox 7000s + VBox + Channel Master 1.2 with 36v actuator CM120 feedhorn and Invacom .3 LNB Skystar 2 PCI card with links to my Dreamboxes If you like what you see here, tell your friends.

23-11-06, 04:26 PM	#3 (permalink)
BGonaSTICK Dodgy Geezer Join Date: Nov 2005 Location: Brighton Posts: 9,718 Thanks: 3 Thanked 166 Times in 60 Posts	Re: Skystar 1 Signal problems - 4.2.2 (feeds) assistance. Help please Regarding the feeds, I've replied to your thread in the feeds section. As for 4:2:2, yes it can be achieved on your Skystar1, certainly in software mode. I take it by your reference to software mode that you have a 'proper' Skystar1 with onboard hardware decoding? I'm not sure if it will do 4:2:2 in hardware mode, but I would be very surprised if it didn't. ProgDVB is a very capable piece of software, and will handle 4:2:2 OK. __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

23-11-06, 04:37 PM	#5 (permalink)
satsid Feedhunter Join Date: May 2006 Posts: 1,814 Thanks: 31 Thanked 86 Times in 62 Posts	Re: Skystar 1 Signal problems - 4.2.2 (feeds) assistance. Help please hi jascha a quick ps here.it will be best when scanning with your ss1 card to scan 7 east your find all ebu feeds that are in 4.2.2 more than other sats sid

02-12-06, 11:43 PM	#6 (permalink)
dardruba Senior Member Join Date: Sep 2006 Posts: 100 Thanks: 5 Thanked 0 Times in 0 Posts	Re: Skystar 1 Signal problems - 4.2.2 (feeds) assistance. Help please Hi to Jascha Just as an aside re the New Year's Day Concert, what do you hope to gain from satellite that the BBC doesnt provide on terrestrialTV?