winborge v5 iso - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

foxlighter · 03-12-06, 08:13 PM

how do i install this winborge v5,iso, i have no floppy and i have this iso cd, i have it set in bios to boot from cd, but what i have read is that i have to do a full reformat,els it wont work right, now what do i need to do,
this winborge file is size 283gb if anybody can help me bloody good,

BGonaSTICK · 03-12-06, 11:00 PM

Yes, the .nfo says you need to reformat your disk first. I would go NTFS. Borg will potentially inherit some of the existing registration data otherwise.

Just burn the ISO and boot from it. I'd take a backup of what you have first if you don't want to lose it. Partitionmagic is good.

foxlighter · 04-12-06, 04:22 PM

well this winborge v5 iso went well, i got the image using nero and burnt to dvdr and thought it was all going to run like it should,but when you put a cd into your drive then reboot its suppoed to say press any key, then it checkes your computer, well thats whats its suppoed to do,but in my case it did not, if it was ok i would be seeing this winborge install field in front of me, like every other time i have done this,so i would suggest that theres somthing rong with my down load, anyway i have just installed xpsp2 proffesonal and its working good,
thanks for the hekp foxlighter

BGonaSTICK · 04-12-06, 08:10 PM

Did you compare the checksum on the download? There's usually an MD5 or SHA-1 Kerberos figure for you to test.

I've had several bad ISO downloads in the past.

foxlighter · 05-12-06, 11:15 AM

bgonastick, not bad name, yes i to have had a few bad iso down loads to,winborge one of them and this windows 8 into 1, this to was not working,whenyou down loads somthing i normally check using my emule tool,
but will next time,thanks, foxlighter

03-12-06, 08:13 PM	#1 (permalink)
foxlighter Member Join Date: Dec 2006 Posts: 43 Thanks: 0 Thanked 0 Times in 0 Posts	winborge v5 iso how do i install this winborge v5,iso, i have no floppy and i have this iso cd, i have it set in bios to boot from cd, but what i have read is that i have to do a full reformat,els it wont work right, now what do i need to do, this winborge file is size 283gb if anybody can help me bloody good,

03-12-06, 11:00 PM	#2 (permalink)
BGonaSTICK Super Murderator Join Date: Nov 2005 Location: Brighton Posts: 10,626 Thanks: 3 Thanked 52 Times in 34 Posts	Re: winborge v5 iso Yes, the .nfo says you need to reformat your disk first. I would go NTFS. Borg will potentially inherit some of the existing registration data otherwise. Just burn the ISO and boot from it. I'd take a backup of what you have first if you don't want to lose it. Partitionmagic is good. __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

04-12-06, 04:22 PM	#3 (permalink)
foxlighter Member Join Date: Dec 2006 Posts: 43 Thanks: 0 Thanked 0 Times in 0 Posts	Re: winborge v5 iso well this winborge v5 iso went well, i got the image using nero and burnt to dvdr and thought it was all going to run like it should,but when you put a cd into your drive then reboot its suppoed to say press any key, then it checkes your computer, well thats whats its suppoed to do,but in my case it did not, if it was ok i would be seeing this winborge install field in front of me, like every other time i have done this,so i would suggest that theres somthing rong with my down load, anyway i have just installed xpsp2 proffesonal and its working good, thanks for the hekp foxlighter

04-12-06, 08:10 PM	#4 (permalink)
BGonaSTICK Super Murderator Join Date: Nov 2005 Location: Brighton Posts: 10,626 Thanks: 3 Thanked 52 Times in 34 Posts	Re: winborge v5 iso Did you compare the checksum on the download? There's usually an MD5 or SHA-1 Kerberos figure for you to test. I've had several bad ISO downloads in the past. __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

05-12-06, 11:15 AM	#5 (permalink)
foxlighter Member Join Date: Dec 2006 Posts: 43 Thanks: 0 Thanked 0 Times in 0 Posts	Re: winborge v5 iso bgonastick, not bad name, yes i to have had a few bad iso down loads to,winborge one of them and this windows 8 into 1, this to was not working,whenyou down loads somthing i normally check using my emule tool, but will next time,thanks, foxlighter


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|