How do you get files from Flashwizard to USB

[Dezzy]

Analoguesat

"To set a cam up use blue then red" what do you mean???

Dezzy

[Analoguesat]

Put the box on a fta channel. (doesnt really matter but you want to be in tv mode watching a channel) Press the blue button then the red button - this second part activates the AutoCam Setup menu

[Dezzy]

Thank you so much Analoguesat,

Can I put all the cams on the list in the Blue Panel? If so do I just follow the same sequence you describe for each one?

"You can set cams up for providers, individual channels or set one up for everything" How do I set it up for everything?

Dezzy

[Analoguesat]

ust stick with a couple to begin with - apparently you can get odd thing happening if you load EVERYTHING - and clog up the directories with various versions of the same file.

I suggested evocamd (3.14 is the latest) simply because its easy to get going with zip files of satans key bundle off the key sites.

!

[Analoguesat]

If you load a cam and go into autocam setup - if it doesnt show up in the cam list reboot the box.

[Jimdefruit]

Dezzy, when you have the emus installed, dont get despondent if you cant clear any channels. You will also need to install key files. Gemini is not the most helpful image when it comes to installing key files. What you will need to do is to download the Satandream keys to your pc and transfer them to the dreambox. The key files go into folders var/keys and var/scce. The reason for the two locations is that some emus use var/keys location and some emus use var/scce location.

If you are around tomorrow and have trouble I will run through it with you on msn.

[Dezzy]

Thank you Jimdefruit I think I will need assistance

Dezzy

[Dezzy]

Hi Jimdefruit

I now have the emus installed, can't clear any channels. Can you tell me which channel should definitely be available. I have installed key files, Satankey bundle.


In the Auto- Cam the drop down menu shows the following Common Interface, Camd3.882, Cam3.882/NewCS-1.20, Evocamd-2.14, Evocamd-2.14/Ronald-CS, Evocamd-2.14/NewCS-1.20,mgCAMD-1.20, MGcamd-1.20/Ronald-CS, MGcamd-1.20/NewCS-1.20, CCcam-16.1, CCcam-16.1, CCcam-Capmtserver-1.6.1, and CCcam-1.6.1/NewCS-1.20 I think I may have one or two too many Which should I take out?

How does the Dreambox select the cam to use? Does it select the Default Cam until You tell it otherwise? Or when you select a channel will it automatically use the correct cam?

Questions, Questions always more Questions!

Dezzy

[Analoguesat]

Set the box default cam to evocamd to begin with:

[Analoguesat]

Once you have done that restart the cam (blue button then green button.

Then try one of the Premiere channels on 19E