Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers
|
|
|
|
Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers
|
|
|
|
||||||
| Register | Members List | Search | Search | Today's Posts | Mark Forums Read |
| Dreambox For satellite Dreambox versions, including 7000, 7020, 7025, 8000, 5620, 500, 600. For cable Dreambox please post here. |
 |
|
|
Thread Tools | Search this Thread |
29-05-07, 04:14 PM
|
#1 (permalink) |
|
Junior Member
Join Date: May 2007
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
sbcl v1.1b help req
hi can any body help with this problem i have installed sbcl v1.1b the 2 files go in the plugins folder and i have alterd MGCAMD but it says put this line in then go to /var/tuxbox/config/newcamd, open "newcamd.conf" and
add this line (xxx=your PC IP): CWS = xxx.xxx.xxx.xxx 6001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv, [where the xxx is do i put my ip] as i have no luck getting this program working thanks  |
|
|
|
30-05-07, 02:23 AM
|
#2 (permalink) |
|
Super Murderator
Join Date: Nov 2005
Location: Brighton
Posts: 10,548
Thanks: 3
Thanked 42 Times in 29 Posts
|
Re: sbcl v1.1b help req
Yes, xxx.xxx.xxx.xxx is the IP of your PC, 6001 is the port ID (you may have to open/forward this on your router, depending on how you have your LAN access configured) and I believe that dummy dummy is the userid and password on the Dreambox - i.e. 'root' and 'dreambox' unless you have changed them. You may not have to alter these.
It works really well (I've been told - I don't use it myself) - especially with CCcam, though MGcamd should work too IIRC. There is a good walkthrough here: _http://www.sat-industry.net/forums/s...d.php?p=175690 I think that you have to synchronise the time on your Dreambox and PC, and you still have to have the keys updated daily in vPlug etc.
__________________
Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W |
|
|
|
