locking up when scanning 19e - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

arden · 15-06-07, 12:37 PM

like the tital says ive got 3 lnbs on a 4 way switch

28e and 8 w scanned ok when i go to 19e says its found a valid transponder then locks up on scan

any ideas ?

arden · 15-06-07, 05:27 PM

sorted

did a factory reset

now need to u/g firmware and figure out how to open channels

wod · 15-06-07, 06:01 PM

yes the box probably has an early image on it like 001 which mine had on it

when you update the image to another one, use the technomate control center over a ethernet connection as its quicker or transfer the image to a memory card to install that way

a good image to start with is juliet 006

as for cams install mgcamd 1.23+newcs as that will get you tps au, premiere, digital + and cabo

as for keys you need to ftp them to var/keys on the receiver

programs to use

technomate control center for transfering images
dreambox control center for ftping files over to the receiver

15-06-07, 12:37 PM	#1 (permalink)
arden Senior Member Join Date: Aug 2006 Posts: 471 Thanks: 4 Thanked 13 Times in 12 Posts	locking up when scanning 19e like the tital says ive got 3 lnbs on a 4 way switch 28e and 8 w scanned ok when i go to 19e says its found a valid transponder then locks up on scan any ideas ? __________________ tm9100 diablo 2.3 and triax 1.1 motorized cards inc AKTA and Gamma

15-06-07, 05:27 PM	#2 (permalink)
arden Senior Member Join Date: Aug 2006 Posts: 471 Thanks: 4 Thanked 13 Times in 12 Posts	Re: locking up when scanning 19e sorted did a factory reset now need to u/g firmware and figure out how to open channels __________________ tm9100 diablo 2.3 and triax 1.1 motorized cards inc AKTA and Gamma

15-06-07, 06:01 PM	#3 (permalink)
wod Senior Member Join Date: Mar 2007 Posts: 2,299 Thanks: 18 Thanked 93 Times in 82 Posts	Re: locking up when scanning 19e yes the box probably has an early image on it like 001 which mine had on it when you update the image to another one, use the technomate control center over a ethernet connection as its quicker or transfer the image to a memory card to install that way a good image to start with is juliet 006 as for cams install mgcamd 1.23+newcs as that will get you tps au, premiere, digital + and cabo as for keys you need to ftp them to var/keys on the receiver programs to use technomate control center for transfering images dreambox control center for ftping files over to the receiver