Comag/Silvercrest SL35 patching - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

BGonaSTICK · 02-07-07, 07:33 PM

If you have a Model of the above and the Manufacture Date is LATER/AFTER as 1.06.2006 you CAN patch it..!
Turn the STB over and on the bottom is the Manufacture Date printed
Just search for these File's and off you go.

1... "SL6502022007"
2..."SL65+SL35-6PINB1PrAllEmu-Tested 26.03.2007"

Works perfectly.
The BEST way to check if your SL35 is the right one is to Open it and gently remove the Silver Pad covering the ALI Chip.
If the Chip has this written on it its OK to Patch.

ALI
M3329 B1
0626 TG05
X607304000GB

After Patching go into the Menu and enter 2580 this TURNS ON the EMU and a message appears with CAS Enabled.. if this happens your on your way..
Enter 2580 again and you TURN OFF the EMU on Board and a message appears CAS Disabled.

Info pulled from Comagforum

Unknown user #1 · 02-07-07, 11:12 PM

Thanks for that! Might try it

Do you know if this patch is applicable for SL65/12?

BGonaSTICK · 03-07-07, 02:30 AM

Some are transferable, but some aren't - there were two different chipsets employed in the SL35, as indicated above. Be very careful. There is also a 35S.

backam · 20-07-09, 01:40 AM

How can i patch my comag sl35? any software? patch ????

02-07-07, 07:33 PM	#1 (permalink)
BGonaSTICK Dodgy Geezer Join Date: Nov 2005 Location: Brighton Posts: 9,718 Thanks: 3 Thanked 163 Times in 57 Posts	Comag/Silvercrest SL35 patching If you have a Model of the above and the Manufacture Date is LATER/AFTER as 1.06.2006 you CAN patch it..! Turn the STB over and on the bottom is the Manufacture Date printed Just search for these File's and off you go. 1... "SL6502022007" 2..."SL65+SL35-6PINB1PrAllEmu-Tested 26.03.2007" Works perfectly. The BEST way to check if your SL35 is the right one is to Open it and gently remove the Silver Pad covering the ALI Chip. If the Chip has this written on it its OK to Patch. ALI M3329 B1 0626 TG05 X607304000GB After Patching go into the Menu and enter 2580 this TURNS ON the EMU and a message appears with CAS Enabled.. if this happens your on your way.. Enter 2580 again and you TURN OFF the EMU on Board and a message appears CAS Disabled. Info pulled from Comagforum __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

02-07-07, 11:12 PM	#2 (permalink)
Unknown user #1 Senior Member Join Date: Jan 2007 Posts: 536 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Comag/Silvercrest SL35 patching Thanks for that! Might try it Do you know if this patch is applicable for SL65/12?

03-07-07, 02:30 AM	#3 (permalink)
BGonaSTICK Dodgy Geezer Join Date: Nov 2005 Location: Brighton Posts: 9,718 Thanks: 3 Thanked 163 Times in 57 Posts	Re: Comag/Silvercrest SL35 patching Some are transferable, but some aren't - there were two different chipsets employed in the SL35, as indicated above. Be very careful. There is also a 35S. __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

20-07-09, 01:40 AM	#4 (permalink)
backam Junior Member Join Date: Jul 2009 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Comag/Silvercrest SL35 patching How can i patch my comag sl35? any software? patch ????